Bids Are Invited For Acquisition Of School Furniture And Equipment Intended To Serve Students From The Education Network Of Santo Antonio Do Itambé/Mg

Office Cabinet - Type: Tall, Raw Material: 22 Plate Steel (0.75Mm), Shelves / Support: 04 Internal Shelves Adjustable 5 In 5 Cm, ​​Drawers: Without Drawers, Doors: 2 Doors, Structure / Base: Steel, Dimensions: 198 X 90 X 45 (Hxwxd). Specification Complementation: Steel Cabinet: Height 198Cm, Width 90Cm, Depth 45Cm. Made Entirely Of 22-Inch Steel (0, With At Least 4 Internal Shelves Adjustable Every 5 Cm, With Longitudinal Reinforcement In The Shape Of A Deomega On The Lower Part Of The Shelf, With 2 Lockable Opening Doors With Key, Through Yalle Type Lock With Internal Locking By Means Of Two Steel Rods And With 02 (Two) Handles In Zamac Or Chromed Metal Of 100Mm Half Moon Type Or Similar, Finish Without Dents, Weld Protrusions, Edges, Abrasions, Burrs, Warps Or Details, Completely Painted In Thick Synthetic Enamel 30 Microns, Electrostatic, With Oven Drying At 150 Degrees Centigrade, In Gray Color:, Seat Bench - Structure:: In Epoxy Painted Steel, Seat Type: Melanimic Coated Mdf, Back: Without Back, Arms: Without Arm, Dimensions: 200 Cm (Length) X 40 Cm (Width) 43 Cm (Height). Specification Complement: Dining Room Bench With At Least 4 Legs, In Gray Color, Variation Of Up To 5% In Measurements Is Allowed, Refrigerated Drinking Fountain - Type: Industrial, Cooling Capacity: 50 Liters/Hour, Reservoir Capacity: 50 Liters, Cabinet: Stainless Steel, Tap: 2 Taps (2). For Cup), Flow: According To Manufacturer, Voltage: 220 Volts, Specification Complement: Refrigerated Drinking Fountain With Stainless Steel Cabinet And Sink, With Internal Replacement Float, Direct Water System., Office Chair - Purpose: Employee, Type: Fixed Four Legs, Backrest: Medium, Armrests: Without Armrests, Seat/Back: Seat And Back With Rounded Edges, Structure: Anatomically Shaped Plywood, Feet: 4 Stick-Type Legs In 7/8 Round Steel Tube, Counter-Seat: Polypropylene, Counter-Back: Polypropylene, Adjustment: Without Adjustment Fixed Chair Without Armrest Type 4 Feet. Made Of Anatomically Shaped Plywood With A Minimum Thickness Of 12 Mm, Upholstered With Anatomically Molded Injected Polyurethane Foam With A Density Of At Least 53 Kg/M (With Point-To-Point Control) And A Thickness Of 50 Mm, Also Covered In Fabric With A 100% Polyester Composition, In A Color To Be Determined By The Organization Requestor, Finished In Impact Protective Edges In Pvc Or Abs Profile. Backrest Measurements: 400 Mm (Width) X 380 (Height), Seat Measurements: 440 Mm (Width) Round Steel 7/8 (Seven Eighths), With A Thickness Of 1.2 Mm, Supported On Injected Polypropylene Shoes In Black. Anti-Rust Treatment. Fixed Structure Type 4 Feet Manufactured In 22.23 (Phosphatized), Coating