Tenders Are Invited For Tiling Work – Dlr Oberpfaffenhofen Site: New Construction Of The Company Restaurant And Conference Center (Brk), Tiling Work (26-0128_B)

Tiling Work – Dlr Oberpfaffenhofen Site: New Construction Of The Company Restaurant And Conference Center (Brk), Tiling Work (26-0128_B). Sealing Aiv-F: - Floor Sealing Aiv-F Reaction Resin W1-I To W3-I, Including Primer Approx. 1,010 M2 - Wall Sealing Aiv-F Reaction Resin W2-I To W3-I, Including Primer Approx. 1,150 M2 - Sealing Tapes W1-I To W3-I Approx. 1,800 M - Sealing Sleeves Approx. 375 Pieces. - Install Built-In Parts, Seal, (Pipe Sleeves, Kitchen Gutters) Approx. 110 Pieces. Tiling Work: - Floor Tiles For Commercial Kitchens, Fine Stoneware, R10-B - R12-V4, Partly Cove Tiles Approx. 915 M2 - Floor Tiles For Sanitary Areas, Stoneware, R10-B Approx. 95 M2 - Wall Tiles For Commercial Kitchens, Stoneware Approx. 1,100 M2 - Wall Tiles Sanitary Areas, Stoneware Approx. 80 M2 Jointing Work: - Elastic Joint Sealing. Sealant Silicone Approx. 1,850 M Execution Period: Expected August 2026 - August 2027 In Order To Ensure The Technical And Design Requirements Of The Project, The Naming Of Lead Manufacturers Is Required For The Tendered Tile Work In Order To Describe The Required Quality Of The Service Clearly, Completely And Without Any Doubt. The Tiles Must Meet The Technically Diverse Requirements Of The Commercial Kitchen Application And Must Fit Precisely Into The Overarching Architectural Material And Color Concept In Terms Of Color, Structure, Grain Proportion, Surface Appearance And Dimensional Accuracy - Especially In The Area Of ​​The Existing On-Site Terrazzo Floors. These Technical And Design Requirements Are An Essential Part Of The Planning Concept And Have A Significant Influence On The Appearance Of The Overall Project. In Particular, The Necessary Coordination With The Existing Terrazzo Surfaces Requires A Reference That Clearly Defines The Material Effect Defined In The Planning, Since The Optical And Haptic Characteristics Of The Tiles Can Only Be Described To A Limited Extent From A Technical Point Of View. In Particular, The Color And Surface Properties, Color And Batch Consistency, In Conjunction With Dimensional Accuracy And Calibration, Surface Hardness And Abrasion Behavior, Slip Resistance With A Defined Microstructure, Chemical Resistance And Light Reflectance Cannot Be Adequately Described In Their Entirety By General Technical Parameters Or Standard References. Without Naming A Lead Manufacturer, A Sufficiently Precise Service Description Would Not Be Possible; This Would Lead To Interpretation Uncertainties And Quality Deviations And Increase The Risk Of Receiving Non-Comparable Offers. The Reference Product Is Mentioned Exclusively To Define Quality And Function. In Order To Protect Competition, Section 7 Eu Paragraph 2 Sentence 2 Vob/A Expressly Stipulates That Equivalent Products From Other Manufacturers Are Permitted Provided They Fully Meet The Described Design And Technical Requirements.