Bids Are Invited For Acquisition Of Equipment For The New Health Units In The Municipality Of Araucária

413141 - Digital Amalgamatorcapsular Dental Equipment With Universal System, Allowing The Use Of All Models Of Pre-Dosed Capsules. Protective Cover In Transparent Acrylic; Have A Safety Device That Prevents It From Operating With The Lid Open; Low Vibration And Extremely Quiet; Bivolt Power Supply (110-220V); With At Least 4,200 Oscillations Per Minute; Electronic Timer With A Scale That Can Go From 0 To 30 Seconds, Adjustment Every 1 Second And The Ability To Memorize The Last Programmed Time. It Has A Base With A Cushioning System (Cushions) That Prevents The Equipment From Moving On The Bench During Operation. Smooth Surface, Facilitating Cleaning And Disinfection Of The Equipment. Inmetro Certificate Of Conformity. Minimum Warranty Of 01 Year., 410454 - Dental Equipment (Dental Ultrasound Device), Type: Bicarbonate Jet And Ultrasound, Physical Aspect: Bench Motor, Body Material: Abs Plastic, Indication: Periodontics, Endodontics, Prosthesis, Dentistry, Source: Electric, Installation: Power Point, Additional Components: Pump Peristaltic, Reservoir P, Liquid, Pedal, Components: 2 Handpieces, 3 Tips For Removal Of Mineralized And Non-Mineralized Biofilm. It Must Come With A Universal Standard Tip Kit: 2 Subgingival Tips And 1 Supragingival Tip, Have A Selector Switch For Three Working Modes (Perio, Endo And General), Allowing The Operator To Adjust The Power Of The Device From 0 To 100%. It Must Have A Regulating Valve, Which Provides Stabilized And Adequate Air Pressure For Removing Biofilm. The Transducer Must Be Light And Small In Size, Equipped With A Piezoelectric System With Ceramic Particles To Generate Constant Vibrations, With The Same Amplitude And Operating Frequency In The Range Of 24 To 32 Khz, In A Single Plane (Linear). The Transducer Must Not Be Heated During The Work Process, Therefore It Must Have An Irrigation Flow Control System Using A Peristaltic Pump, With Multiple Adjustment Levels Selectable Via The Panel, Essential For Cooling And Removing Debris. Peristaltic Pump And Irrigating Liquid Reservoir Attached To The Device (With A Minimum Capacity Of 500Ml), Which Enables The Use Of Antiseptic Or Disinfectant Liquids For Irrigation. The Bicarbonate Jet Must Have A Removable And Autoclavable Tip, With A Duct Cleaning System To Prevent Clogging And A Pressure Regulating Valve To Stabilize Air Pressure. Voltage: Automatic Bivolt With A Wide Tolerance Range; Minimum Power 30W; Frequency: 24 To 32 Khz. Anvisa Registration And Inmetro Certificate. With At Least 1 Year Of Total Warranty, Including The Transducer., 410459 - Dental Equipment, Type: Photopolymerizer, Physical Aspect: Wireless Handpiece Base, Tip Material: Fiber Optic Or Acrylic Tip, Source: Led Light, Installation: Electric, Components: Eye Protector For Direct And Indirect Restorative Procedures, With Cold Light To Not Cause Heating Of The Resin And Tooth, With Photoactivation Using Led Light. It Should Be Lightweight To Provide Handling Comfort And Cordless To Allow Freedom Of Movement And Total Control. Have Low Energy Consumption, Power/Curing Speed ​​Between 1000 And 2000 Mw/Cm²; Must Feature Lithium Battery Without Memory Effect. Wavelength 420Nm-490Nm, With Digital Control On The Handpiece Display, With Option To Choose Continuous Variation Time 5, 10