Alkyd Gloss Paint (Enamel) Alvan Prince-Color-White Product Type: Alkyd Enamel, Glossy Purpose: Alkyd Gloss Paint Alvan Prince Is Intended For Interior And Exterior Finishing Works For The Purpose Of Decorative And Protective Painting Of Various Surfaces. Area Of Application: Wooden Surfaces Metal Structures Plastered Surfaces Concrete And Brick Primed Bases Paint Base: Alkyd Composition: Alkyd Binder Organic Solvents Pigments Functional Additives Coating Appearance: Color: According To The Manufacturers Range Gloss Level: Glossy Structure: Homogeneous Physical And Chemical Characteristics: Density: 0.90–1.20 G/Cm³ Viscosity: Ready For Use Dry Residue: At Least 45% Odor: Characteristic Of Alkyd Enamels Consumption: In One Layer: 10–12 M² Per 1 Liter (Depending On The Type And Condition Of The Surface) Drying Time (At +20°C): Touch-Touch: 6–8 Hours Interlayer Drying: 12–24 Hours Complete Drying: At Least 24 Hours Performance Properties: Resistant To Atmospheric Influences Moisture Resistant Resistant To Mechanical Loads Forms A Durable Glossy Coating Method Of Application: Apply With A Brush, Roller Or Spray Method. Mix Thoroughly Before Use. If Necessary, Dilution With White Spirit Or Solvent Is Allowed (Up To 5–10%). Application Conditions: Air Temperature: Not Lower Than +5°C Relative Air Humidity: No More Than 80% Packaging: Metal Can, Volume – 3.5 Liters Storage Conditions: In A Tightly Closed Container At A Temperature From +5°C To +30°C Far From Sources Of Fire And Direct Sunlight Compliance Requirements: Products Must Comply With The Current Sanitary, Environmental And Fire Regulations Of The Republic Of Kazakhstan.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
