The Subject Of This Order Is The Repair And Restoration Of Part Of The Fence Of The Boyana Complex At The Council Of Ministers, Sofia, Vitosha District, 16 Vitoshko Lale Street. The Sections For Repair And Restoration Of The Fence Are Located Along Daskal Stoyan Popandreev Street And Alexander Pushkin Street. For Construction And Assembly Works (Smr), A Construction Permit And Approval Of Project Documentation Are Not Required According To Art. 151 Of The Law On Territorial Planning (Zut). The Repair Will Be Carried Out As Ongoing In The Sense Of The Zut, Which Does Not Change The Parameters Of The Existing Fence. During The Repair And Restoration Of The Fence Panels, It Is Necessary To Carry Out Activities In The Following Scope: Cleaning Of Grassy And Creeping Vegetation In The Range Of Fence Panels Intended For Repair And Restoration. Dismantling Of Highly Compromised 8 Existing Fence Panels That Are Not Subject To Repair And Restoration And Their Replacement With New, Identical In Size, Materials And Grid To The Existing Ones. Reinforcement Of Metal Fence Panels Intended For Repair And Restoration To Existing Concrete Foundations. In A Section Of 90 Linear Meters Around The Bus Stop On Daskal Stoyan Popandreev Street, Restoration And Reparation Activities Should Also Be Carried Out On The Broken Concrete Coating Of The Foundation With A Flowable Cement Solution (Microconcrete On Average Three Centimeters) With Preliminary Treatment Of The Laid Reinforcement. Dismantling Of Existing 1859 Pcs. And Delivery And Installation Of New 1859 Pcs. Reinforcing Metal Elements, Each 0.3 M Long, And Dismantling, Delivery And Installation Of 73 Pcs. Reinforcing Metal Elements, Each 0.6 M Long, In The Lower Part Of The Fence Panels. The Existing Vertical Metal Rails Of The Fence Should Be Strengthened And Welded To The Reinforcement Elements At The Top And Bottom Of The Fence Panels. Mechanical Cleaning Of Corrosion Of 143 Pieces Of Fence Panels Subject To Repair And Restoration, After Which To Carry Out Their Treatment With A Rust Converter. All Metal Surfaces And Welding Seams Should Be Treated With An Anti-Corrosion Primer - On Both Sides In Two Layers. All Metal Surfaces Of The Fence Panels Should Be Painted On Both Sides In Two Layers With Alkyd Paint For Exterior Use. Paint Color According To Ral 9005 Or Identical. The Concrete Foundation Of The Fence Should Be Covered With A Protective Agent (Foil And/Or Corrugated Cardboard) During The Treatment, In Order To Protect Against Contamination And Staining When Applying The Rust Converter, Primer And Paint. All Planned Types Of Repair And Restoration Work On The Fence Are Detailed In The Attached Bill Of Quantities
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
