Bids Are Invited For Hiring A Company To Supply Tools

Lever In Sae 1045 Carbon Steel, Cylindrical, Smooth, With Heat Treatment At The Tip And Wedge Ends (Tempered), . Dimensions: 1.1/8 (Round) Length Of 1.80 M. The Material Must Comply With Article 31 Of The Consumer Protection Code, And Be Permanently Marked With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Considered Satisfactory., 12 Pointer (300 Mm), In Special Steel, According To Standard Din 7255, Made With Hexagonal Or Octagonal Bar, Measuring 300 Mm 7255, 300 Mm To 350 Mm Long X 18 Mm (+/- 2 Mm) Thick With Sanded Faces, With Insulation For 1000 V, In Accordance With Nbr 9699. They Must Have A Permanent Marking With The Name Or Brand Of The Manufacturer., 250 Mm Pressure Pliers (10) In Chrome Steel - Vanadium And Nickel-Plated Finish. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. The Material Must Be In Accordance With Article 31 Of The Consumer Protection Code And Have A Permanent Marking With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Considered Satisfactory., 04/24/2026 - 09:52:32, 250 Mm Water Pump Pliers (10 Or 12), According To Din 17350, According To Nbr 9699, Slots For 4 Or 6 Positions And Safety Stops. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. Marking With Removable Material Will Not Be Considered Satisfactory., Telephone Type Pliers Straight Nose / Half-Reed 6 (152, 40 Mm), According To Abnt Nbr Iso 5745, Made Of Cr-V Steel, Handle With Polymer And Insulation For 1000 V According To Nbr 9699. The Material Must Have A Permanent Marking With The Name Or Brand Of The Manufacturer., Universal Pliers 200 Mm (8) In Chrome-Vanadium Steel, With Insulation For 1000 Volts According To Nbr 9699 - Nr10 - Din Iso 5749, Phosphated Finish With The Head And Joints Sanded. Insulation Capacity Engraved On The Cable. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. Marking With Removable Material Will Not Be Considered Satisfactory., 2.5 Mm Parallel Drill, In High Speed Steel, With Titanium, Cylindrical Shank, For Use In Steel, Cast Iron, Electrolytic Copper, Bronze, Brass, Etc. The Material Must Comply With Nbr 7438 And Have A Permanent Marking With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Considered Satisfactory., 8Mm Parallel Drill, 10Mm Parallel Drill, 10Mm Parallel Drill, 11Mm Parallel Drill, 11Mm Parallel Drill, 12Mm Parallel Drill, 12Mm Parallel Drill, 13Mm Parallel Drill, 6Mm Video Drill Mm, With Carbide Tip, For Use In Concrete. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. Marking With Removable Material Will Not Be Considered Satisfactory., 2.0 Marking With Removable Material Will Not Be Considered Satisfactory., 1/4 X 5/8 Centering Drill In High Speed ​​Steel, 1 Centering Drill