Bids Are Invited For Placing And Installation Service For Lining Made Of Common Plasterboards, 60 Cm Each, With The Insertion Of Steel Pins In The Ceiling Placed Every 60 Cm Maximum (Normal Size Of The Board), Placed With Appropriate Equipment For This Purpose, With Steel Or Copper Wire Passed Through A Hole In The Pin, Which Must Be Attached To The Board In A Hole, Twisting It Well To Tie The Piece. Placement Of Putty Made From Gypsum Powder, Water And Sisal For Finishing, Placed Next To The Wall To Reinforce The Fixation And Fixation And Union Of Plates, With Placement Of A Fixed Frame, When Requested By The Project. The Plasterboards Must Have Tongue-And-Groove Fittings On The Sides And Receive The Same Putty For Finishing The Joints, After Removing The Leftover Wire. All Material Used Will Be Purchased By The Service Provider

Placement And Installation Of Lining In Common Plasterboards, Measuring 60 Cm Each, With The Insertion Into The Ceiling Of Steel Pins Placed Every 60 Cm Maximum (Normal Size Of The Board), Placed With Appropriate Equipment For This Purpose, With Steel Or Copper Wire Passed Through An Existing Hole In The Pin, Which Must Be Attached To The Board In A Hole, Twisting It Well To Tie The Piece. Placement Of Putty Made Of Gypsum Powder, Water And Sisal To Carry Out Finishing, Placed Next To The Wall To Reinforce The Fixation And Fixing And Joining Of Plates, With Placement Of Fixed Frame, When Requested By The Project. Plasterboards Must Contain Male-And-Female Fittings On The Sides, They Receive The Same Putty For Finishing At The Joints, After Removing The Leftover Wire. All Material Used Will Be Purchased By The Service Provider For Laying And Installing Common Plasterboard Lining.