Bids Are Invited For Price Registration For Possible And Future Acquisition Of Cast Iron Plugs For The Water And Sewage Sectors Of Saae Formiga.

Hinged Cap For Inspection Boxes, Manholes Or Similar Devices In Sanitation Networks, With Nominal Diameter Dn 600 And Load Class D400, Intended For Areas Subject To Vehicle Traffic. Made Of Cast Iron, As Per Copasa Standard, Equipped With A Polyethylene Ring For Damping, Noise Reduction And Better Seating. The Set Must Have An Articulation System, Automatic Locking And Anti-Theft Locking Device, Ensuring Operational Safety, Stability And Protection Against Improper Opening. The Cap Must Contain The Identification In Relief With The Acronym Âsaae Formiga - Sewer. It Must Fully Comply With Abnt Nbr 10160, Or The Standard That Replaces It, Presenting Mechanical Resistance Compatible With The Specified Class, Suitable Finishing And Durability For Use On Public Roads. Minimum Dimensions And Characteristics Required: Lid Height: 23 Mm; Basement Base Diameter: 740 Mm; Free Passage Level: 605 Mm; Screen Height: 100 Mm; Minimum Weight Of The Set: 39 Kg. The Product Must Be Supplied Complete, Ready For Installation, Free From Cracks, Burrs Or Manufacturing Defects, With A Minimum Guarantee Against Defects And Non-Conformities. (Broad Competition), With Minimum Guarantee Against Defects And Non-Conformities. (Me/Epp Reserved Quota), Cap For Protection Of Maneuver Registers Installed In Water Supply Networks, Model Tl-200, Made Of Cast Iron, Intended To Support Loads Compatible With Urban Areas And Circulation Roads. The Product Must Have A Minimum Resistance Of 12,500 Kg And Load Class B125, Guaranteeing Safety, Durability And Stability During Operation And Incidental Traffic. The Cap Must Have An Adequate Finish, Firm Seating And Identification In Relief With The Acronym Âsaae Formiga, Ensuring Patrimonial Standardization And Institutional Identification. Minimum Required Dimensions: Total Height: 135 Mm; Basement Base Diameter: 345 Mm. The Set Must Be Supplied Complete, Free From Cracks, Burrs Or Any Manufacturing Defects, And Must Present Mechanical Resistance Compatible With Its Purpose And A Minimum Guarantee Against Manufacturing Defects. (Reserved Quota Me/Epp), 04/24/2026 - 14:26:04