Quotation Are Invited For Fabrication And Machining Of Generator Bearing Oil Labyrinth Seals Ofgt-1 And 2

Quotation are invited for Fabrication and Machining of Generator Bearing Oil Labyrinth Seals OFGT-1 and 2 1-Fabrication Machining of 1032600063 1 ITEM-00001 PR-1032600063FABRICATION AND MACHINING OF GENERATOR BEARING OIL LABYRINTH SEALS OFGT-1 &2 AT E-STATION, PLANT-1, JAPSTECHNICAL SPECI FICATIONS & GENERAL REQUIREMENTS OF JOBGENERATOR DETAILS:A)#MANUFACTURER####:#AEGB)#TYPE### ##:#S7603/2C)#SERIAL NO.#####:#786/005 & 786/006 (GTE1 & GTE2)D)#RATED POWER####:#125 MVAE)#RATED VOLTAGE####:#10.5 KV +/ 5%F)#RATED CURRENT####:#7698 AG)#RATED FREQUENCY## ##:#50 HZH)#POWER FACTOR####:#0.80I)#POLE NUMBER####:#2J)#RATED SPEED####:#3000 RPMK)#INSULATION CLASS####: #FL)#TEMPERATURE RAISE## #:#CLASS B +10 DEGREE KM)#COOLING TYPE####:#ICW 37 A91N)#OUT OF BALANCE LOAD###:#10%1.#SCOPE OF WORKA)#FABRICATE, MACHINE AND SUPPLY OF GENERATOR BEARING OIL LABYRINTHSEALS AS PER BELOW QUANTITY.##BEARING OIL SEAL RINGS FOR GTE1 & GTE2: TWO SETS (BOTH DE & 2 JOB NDE SID ESEALS) FOR EACH UNIT,B)#CONDUCT VISUAL INSPECTION AND RECORD FOR ANY DEFECTS.C)#PRE-REPAIR INSPECTION OF THE SEAL/DEFLECTOR TO RECO RD THEDIMENSIONS.D)#THE DIMENSION AND SHAFT MEASUREMENT SHALL BE TAKEN AT THE SITE FORTHE FABRICATION OF THE SEALS WITH THE REQUIRED CLEARANCESE)#THE CONTRACTOR SHALL COLLECT THE OIL SEALS FROM E-STATION, JAPS ANDRETURN TO SAME LOCATION AFTER MACHINING.F)#SEAL STR IPS WILL BE PROVIDED BY DEWA.G)#THE FABRICATION AND MACHINING WORK SHALL BE COMPLETED WITHIN 5 DAYSFROM THE DATE OF HANDOVER.H)#AFTE R FIXING THE LABYRINTH SEALS, IT SHALL BE ASSEMBLED, RESULTANTBORE SHALL BE MEASURED, AND THIS SHALL BE COMPARED WITH THE SHAFT.FURT HER MACHINING SHALL BE DONE IF REQUIRED TO ACHIEVE THE REQUIREDCLEARANCE SPECIAL NOTES / INSTRUCTIONS: Fabrication and Machining of Generator bearing oil Labyrinth seals ofGT-1 and 2 At E-Station, Plant-1, JAPS. FOR Queries contact moh [email protected] 04-3226132 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2412600691)/$value