Welding Electrodes -13/55 3.0 X 350 Mm. The Electrodes Must Be Designed For Manual Arc Welding With Direct Current Of Reverse Polarity, Ensuring Welding Of Carbon And Low-Alloy Steels. Must Be Suitable For Welding Work In All Spatial Positions And Ensure The Formation Of A Strong And Ductile Weld. The Electrodes Must Ensure A Minimum Number Of Pores And Cracks In The Welded Joint, And Are Also Suitable For Welding Structures Operating Under Load. The Electrodes Must Ensure Stable Arc Burning And Easy Slag Separation. Electrode Diameter Is Not Less Than 2.7 Mm And Not More Than 3.1 Mm; Length Not Less Than 345 Mm And Not More Than 355 Mm., Petal Discs F 180. Petal Circle 180*22 14A 40N. The Diameter Of The Circle Must Be No Less Than 177 Mm And No More Than 183 Mm. The Mounting Hole Must Be At Least 21.2 Mm. The Type Of Wheel Should Be Flap Grinding. It Must Be Designed For Grinding Metal Surfaces, Ensuring The Removal Of Burrs And Irregularities, Cleaning Welds, Uniform Surface Treatment Without Overheating The Material, And Be Highly Resistant To Wear During Intensive Use., Grinding Wheel 180*6*22 The Wheel Should Be Designed For Grinding Metal Surfaces. Ensure Cleaning Of Welds, Removal Of Burrs And Irregularities. Must Be Suitable For Rough Grinding Of Steel And Structural Materials. Should Ensure Uniform Surface Treatment Without Overheating The Material. The Diameter Of The Circle Is No More Than 180 Mm, The Thickness Is No Less Than 6 Mm, The Mounting Hole Is No More Than 22 Mm., Aluminum Sheet 1250*2500*3.0 Mm. The Sheet Thickness Must Be At Least 2.8 Mm And No More Than 3.15 Mm. The Width Of The Sheet Must Be No Less Than 1240 Mm And No More Than 1260 Mm, The Length Of The Sheet Must Be No More Than 2600 Mm. The Surface Of The Sheet Must Be Smooth, Without Cracks, Delaminations And Defects That Affect The Strength. The Sheet Must Be Intended For The Manufacture Of Structures, Cladding, Parts And Equipment Elements, Provide The Possibility Of Further Mechanical Processing (Cutting, Welding, Bending), Must Have Corrosion Resistance And Durability., The Wire Diameter Must Be No Less Than 0.95 Mm And No More Than 1.07 Mm. The Mass Of The Reel Should Be No More Than 5.5 Kg. The Wire Must Be Designed For Semi-Automatic Welding In A Shielded Gas Environment, Have A Copper Coating To Improve Electrical Conductivity And Protect Against Corrosion, Ensure Stable Arc Burning, A Minimum Amount Of Welding Spatter, Ensure The Formation Of A Strong And Ductile Seam, And Be Suitable For Welding General-Purpose Structures And Critical Components., Hot-Rolled Sheet 10 Mm 1500X6000 Mm. Hot Rolled Sheet – 2 Pcs. The Sheet Thickness Must Be At Least 9.8 Mm. The Width Of The Sheet Must Be No Less Than 1495 Mm And No More Than 1505 Mm, Length No Less Than 5995 Mm. The Sheet Must Be Produced By Hot Rolling. The Surface Of The Sheet Must Be Smooth, Without Cracks, Delaminations And Defects That Affect The Strength. The Sheet Must Provide The Possibility Of Further Mechanical Processing (Cutting, Welding, Bending). Along With The Sheet, The Potential Supplier Must Organize The Supply Of Plates: 220X220 - 48 Pcs; 180X180 – 96 Pcs; 150X130 - 24 Pcs; 150X150 - 48 Pcs., Flap Discs F 125. Conical Flap Grinding Wheel 3M 769F, 60+, 125 Mm (52007). The Diameter Of The Circle Must Be No Less Than 124 Mm And No More Than 126 Mm. The Mounting Hole Should Be No More Than 22 Mm. The Wheel Type Should Be A Conical Flap Grinder. It Must Be Designed For Grinding Metal Surfaces, Ensuring The Removal Of Burrs And Irregularities, Cleaning Welds, Uniform Surface Treatment Without Overheating The Material, And Be Highly Resistant To Wear During Intensive Use., Tungsten Tip (Electrode) E3 2.4X175 Purple (700.0308). Tungsten Electrode – 1 Pack. The Diameter Of The Electrode Must Be No Less Than 2.27 Mm And No More Than 2.54 Mm. The Length Of The Electrode Must Be No Less Than 171.5 Mm And No More Than 177 Mm. The Electrode Type Must Be Tungsten With Rare Earth Additives. The Electrode Must Be Designed For Argon Arc Welding, Ensure Stable Ignition Of The Arc And Its Stable Combustion, Must Be Suitable For Welding Carbon, Low-Alloy And Stainless Steels, As Well As Non-Ferrous Metals, Provide Welding In Various Spatial Positions, Ensure A Minimum Number Of Inclusions And Defects In The Weld, Suitable For Use Under Medium And High Load Conditions., Tungsten Tip (Electrode) 2.4X175 Gray (700.0169). The Diameter Of The Electrode Must Be No Less Than 2.25 Mm And No More Than 2.61 Mm. The Electrode Length Must Be No Less Than 169 Mm And No More Than 183.4 Mm. The Type Of Electrode Should Be Tungsten With The Addition Of Cerium. The Electrode Must Be Designed For Argon-Arc Welding, Ensure Stable Ignition Of The Arc And Its Stable Combustion, Must Be Suitable For Welding Carbon, Low-Alloy And Stainless Steels, Provide Welding In Various Spatial Positions, Ensure A Minimum Number Of Inclusions And Defects In The Weld, Must Be Suitable For Use Under Medium And High Load Conditions., Cutting Wheel 125 X 1.6 X 22 Mm A646r (340946). Must Be Designed For High-Precision And Fast Cutting Of Metal Materials. Should Provide A Clean And Even Cut Without Significant Heating Of The Material. High Wear Resistance. Must Be Compatible With Standard Type Angle Grinders. The Diameter Of The Circle Is Not More Than 125 Mm, The Thickness Is Not Less Than 1.6 Mm, The Mounting Hole Is Not More Than 22 Mm., Grinding Wheel 125*6*22 The Wheel Should Be Designed For Grinding Metal Surfaces. Ensure Cleaning Of Welds, Removal Of Burrs And Irregularities. Must Be Suitable For Rough Grinding Of Steel And Structural Materials. Should Ensure Uniform Surface Treatment Without Overheating The Material. The Diameter Of The Circle Is No More Than 125 Mm, The Thickness Is No Less Than 6 Mm, The Mounting Hole Is No More Than 22 Mm., Food Grade Stainless Steel, Thickness 3 Mm, 2 Sq.M. 3.0X1000x2000=101100 (Grinding). The Sheet Thickness Must Be At Least 2.7 Mm And No More Than 3.3 Mm. The Width Of The Sheet Must Be No Less Than 990 Mm And No More Than 1020 Mm, The Length Of The Sheet Must Be No Less Than 1995 Mm. The Sheet Must Be Made Of Stainless Food Steel. The Surface Of The Sheet Must Be Polished (Matte), Without Cracks, Delaminations And Defects. The Sheet Must Be Suitable For Contact With Food Products, Intended For The Manufacture Of Food Equipment, Containers, Tables, Surfaces And Structures, Provide Resistance To Corrosion And Detergents, Suitable For Mechanical Processing (Cutting, Welding, Bending), Ensure Durability And Sanitary Safety During Operation., Cutting Wheel 180*1.6*22 Mm Should Be Designed For High-Precision And Fast Cutting Of Metal Materials. Should Provide A Clean And Even Cut Without Significant Heating Of The Material. High Wear Resistance. Must Be Compatible With Standard Type Angle Grinders. The Diameter Of The Circle Is No More Than 180 Mm, The Thickness Is No Less Than 1.6 Mm, The Mounting Hole Is No More Than 22 Mm., Cutting Disc For Pipe Cutter Diameter 355 Mm. Metal Cutting Disc 355 X 3.2 X 25.4 Mm. Bcd35532m. The Diameter Of The Disc Must Be No Less Than 354 Mm And No More Than 356 Mm. The Thickness Of The Disc Should Be No More Than 3.3 Mm. The Mounting Hole Must Be At Least 25.4 Mm. The Disc Must Be Designed For Cutting Metal, Compatible With Standard Cutting Machines, Ensure A Clean And Even Cut Of Metal Workpieces, A Minimum Number Of Sparks And Overheating Of The Material, Be Highly Resistant To Wear During Intensive Use, And Be Suitable For Long-Term Operation Without Loss Of Cutting Properties., Electrodes 3 Mm: Tube. The Electrodes Must Be Designed For Manual Arc Welding With Direct And Alternating Current And Ensure Welding Of Carbon And Low-Alloy Steels. Must Be Suitable For Welding Work In All Spatial Positions And Ensure The Formation Of A Strong And Ductile Weld. The Electrodes Must Ensure A Minimum Number Of Pores And Cracks In The Welded Joint, And Are Also Suitable For Welding General-Purpose Structures. The Electrodes Must Ensure Stable Arc Burning. Electrode Diameter Is Not Less Than 2.7 Mm And Not More Than 3.1 Mm; Length Not Less Than 345 Mm And Not More Than 355 Mm.
