Request For Quotation Products For Metrology.

Thermometer Ts7-M1 (Use 1) For Wards. Feature - The Thermometer Is Made With An Embedded Paper Scale. Case Material - Glass. Type Of Glass - Technical. Scale Of Measurement Units - C. Scale Division Value: 1. Thermometric Liquid - Methylcarbitol. Range -20...+70 C. Scale - 1C°. Length L - 205 Mm. A Plastic Frame Is Required. Frame/Body Material: Polyethylene. Thermometers Must Undergo Initial Verification At The Factory In 2025 To The Manufacturer Or Provide A Verification Certificate No Earlier Than 2025. Condition – New, In Original Packaging With A Passport/Instructions Indicating The Serial Number, Date Of Manufacture And Initial Verification Stamp. Color: White., Hygrometers Vit-2. It Consists Of A Plastic Base On Which Is Attached A Temperature Scale With Two Capillaries, The Reservoir Of One Of Which Is Moistened With A Fabric Wick Lowered Into A Feeder With Water, And A Table For Determining The Relative Humidity Of The Air From The Difference In The “Dry” And “Moistened” Readings. The Feeder Is Fixed On The Inside Of The Base. The Scale Plate And Table Are Metal. The Relative Humidity Measurement Range Is 20...90%. Temperature Range For Humidity Measurement +20...+40°С. Temperature Measurement Range +15...+40°С. The Scale Division Value Is 0.2°C. Thermometric Liquid - Toluene. Overall Dimensions - 325×120×50 Mm. Weight - 350 G. The Hygrometer Must Undergo Initial Verification At The Manufacturer In 2025 Or Provide A Verification Certificate No Earlier Than 2025. Condition – New, In Original Packaging With A Passport/Instructions Indicating The Serial Number, Date Of Manufacture And Initial Verification Stamp. Color - Blue., Thermometer Ts7-M1 (Version 6) For Refrigerators. The Thermometer Is Made With An Inserted Paper Scale. The Device Consists Of A Glass Base Placed In A Plastic Frame To Ensure Safe Use. Case Material - Glass. Type Of Glass - Technical. Measurement Scale - C. Scale Division - 1. Thermometric Liquid - Methylcarbitol. Measured Temperature Range: -30...+30 °C. The Division Value Is 1 °C. Measurement Error: ±1.5°C At Temperatures -30...0°C, ±1°C At Temperatures 0...+100°C. Base/Body Material - Polyethylene. Overall Dimensions - 151 (H) X 21 (Ø) Mm. Weight - 15 Gr. Thermometers Must Undergo Initial Verification At The Manufacturer In 2025 Or Provide A Verification Certificate No Earlier Than 2025. Condition – New, In Original Packaging With A Passport/Instructions Indicating The Serial Number, Date Of Manufacture And Initial Verification Stamp. Color: White.