Tenders Are Invited For Scene Machinery Studio Scene

scene Machinery Studio Scene . Description The Tender Concerns The Replacement Of The Upper Stage Machinery On The Studio Stage At Dansens Hus In Oslo According To The Technical Specification. The Current System Is Nearing The End Of Its Life. In Addition, The System Is Limited In Functionality, Lacks Positioning And Load Monitoring, And Does Not Meet Current Safety Requirements. Other Goals Of The Upgrade Include: * More Suspension Options/Points. * Easier Changes And Shorter Changeover Time Between Productions. * Better Working Environment. It Should Not Be Necessary To Use A Lift To Move Hoists Or Suspension Points. * Possibilities For Movement During Performances. The Project Consists Of Two Parts: 1. Building Works Consisting Mainly Of Changes To The Steel Structure In The Roof As Well As Relocation Of Building Technical Installations. 2. Design, Production And Installation Of The Stage Machinery. Each Project Part Is A Turnkey Contract Where The Turnkey Contractor Has Complete Responsibility For Engineering, Planning, Production, Installation, Testing, Training And Documentation. This Competition Concerns Project Part 2, Delivery Of The Stage Machinery. The Planned Solution Is Based On A System Of Traditional Stage Features With The Addition Of Point Features. There Are Up To 16 Stage Moves, 2 Side Moves, And 4 Lanes For A Variable Number Of Point Moves. The Tie Rods Are Supported By Four Steel Wires Or Steel Bands. A Steel Structure Dedicated To The Stage Machinery Will Be Installed By Another Contractor. The Existing Hea Beams Will Be Dismantled. Eight New Beams Will Be Installed In The Halls Lengthwise Direction, Positioned So That Four Are Used For Stage Covers And Four For Point Covers And/Or Other Temporary Equipment. The Machinery Will Be Located Above The Balcony On One Side Of The Stage. A Partition Wall Will Be Set Up To Create An Engine Room And Screen For Sound Between The Winches And The Stage. The Entire System, Including The Features And Control System With Safety Functions, Must Be Constructed In Accordance With The Standard No-En 17206 Event Technology, Machinery For Stages And Other Production Areas, Safety Requirements And Inspections. The Installation Must Comply With Relevant Eu Directives, Including The Machinery, Low Voltage And Emc Directives. A Complete Description Of The Delivery Follows From Appendix 1095-922 Technical Specification.