Tenders Are Invited For Renovation Of The Municipal Building At Ul. Katowicka 8 In Kamienna Góra

The Subject Of The Order Is The Execution Of Renovation And Thermal Modernization Works Of A Residential Building At Ul. Katowicka 8 In Kamienna Góra. The Building Is Located On A Plot According To The Land Register No. 189/39, District 7 Of The City Of Kamienna Góra. The Building Is Located In The Area Covered By The Local Spatial Development Plan For The Area In The Area Of ​​Wałbrzyska, Katowicka And Księ Bolka I Streets In Kamienna Góra (Resolution No. Xxx/187/20 Of 2020-10-28 Of The Kamienna Góra City Council). The Subject Building Is A Compact Development, Located At Katowicka Street, And Has One Entrance: From The Yard Behind The Building. On The South Side, The Building Borders A Multi-Family Property, And On The Eastern External Wall, In The Ground Floor Part, It Borders Utility Rooms. A Multi-Family Building, Three-Story, Without A Basement, With A Shape Similar To A Rectangle, Made In Traditional Technology With Walls Made Of Ceramic Bricks, A Ceramic Arched Ceiling Above The Ground Floor, Wooden Inter-Story Ceilings And A Flat Roof With A Wooden Structure, Covered With Roofing Felt On The Full Formwork. The Building Is The Property Of The Kamienna Góra Municipality. There Are 6 Residential Premises In The Buildings (One Premises Connected 1+2 - Which Gives A Total Of 5 Functioning Premises). The Administrator And Manager Of The Building Is Spółka Mieszkaniowa Sp. Z O. O. In Kamienna Góra. As Part Of This Order, On The Basis Of The Developed Design Documentation Constituting An Annex To The Opz, It Is Envisaged To Perform Construction Works, I.E.: - External Earthworks Including The Construction Of A Reinforced Pressure Wall For Foundation Walls, - Horizontal Moisture-Proof Insulation In The Form Of A Double-Row Crystalline Pressure Injection And A Vertical Heavy Coating Injection, - Insulating The Wall In The Ground With Xps Polystyrene Foam. 10 Cm With A Coefficient Of Λ = 0.035W/(M·K) Including The Installation Of Dimpled Foil, - Strapping The Walls And Sewing Cracks In The External Walls, - Renovation Of The Buildings Facade By Breaking The Existing Plasters, Local Repair Of The Walls And Thermal Insulation Of The External Wall With Styrofoam Thickness. 15 Cm With Coefficient Λ = 0.031 [W/(M·K)] Finished With Silicone Plaster Along With Titanium - Zinc Flashings (Window Sills) And Reconstruction Of The Inter-Story Cornice, - Dismantling The Stone Cladding Of The Plinth Along With Insulation And Making Cladding In The Form Of Clinker Tiles, - Dismantling The Existing Roof Covering, Replacing The Formwork, Strengthening The Structure By Overlays To Existing Rafters (Increasing Cross-Sections) And Insulating The Flat Roof With Thick Polystyrene. 20 Cm Λ = 0.031[W/(M·K)] And In The Part, Above The Apartment, Additional Insulation Of The Spaces Between The Rafters With Mineral Wool With A Coefficient Of Λ = 0.040[W/(M·K)] And Thickness. 15 Cm, Including The Implementation Of A Two-Layer Covering Made Of Thermally Weldable Felt And Repla