Tenders Are Invited For Expansion Of Publicly Available Sports Infrastructure And Improvement Of Access To Health Prevention Through The Construction Of A Tartan Track And Ski Jumps.

1. The Subject Of The Order Is The Construction Of A Three-Lane Sports Track And A Long Jump Jump, As Well As The Replacement Of Lighting, As Part Of The Implementation Of The Investment Task Entitled: Expansion Of Publicly Available Sports Infrastructure And Improving Access To Health Prevention Through The Construction Of A Tartan Track And A Jump. The Project Will Be Implemented In Lidzbark Warmiński, Ul. Polna 36. Plot No. 31/2 District 3. The Task Is Implemented As Part Of The Intervention I.13.1 Leader/Community-Led Local Development (Clld) - Lds Implementation Component Under: Strategic Plan For The Common Agricultural Policy For 2023-2027 From The European Agricultural Fund For Rural Development. 2. The Scope Of Works (Construction Industry) Specified In The Design Documentation Constituting Annex No. 11 To The Swz. 1) In The Scope Of The Construction Industry: A) Construction Of A Running Track And Inrun: * Construction Of A Running Track 80 Meters Long (3 Tracks 1.22 M Wide Each) And A Long Jump Inrun (Track 1.22 M Wide And 40.00 M Long) With A Total Polyurethane Surface Area Of ​​341.20 M². Cross Slope Of The Track 1%. Longitudinal Slope Consistent With The Slope Of The Terrain. * Application Of The Running And Runway Surface: - Epdm Wear Layer Applied By Spraying, Thickness. 2 Mm, - Shock-Absorbing Layer Made Of Ground Sbr Rubber, Thick. 11 Mm - Self-Supporting Spd Stabilizing And Shock-Absorbing Layer, Thickness 3.5 Cm - Substructure: Mechanically Stabilized Crushed Aggregate 0/31.5 Mm, Thickness. 15 Cm - Drainage Layer: 0/63 Mm Aggregate, 10 Cm Thick * Limiting The Surface With Concrete Edges On A Bench With C12/15 Concrete Resistance, Finished With Polyurethane Spraying Or Sbr Rubber Pads (Glued With Polyurethane Glue To The Edges). * Finishing, Marking And Conditions Of Use Of The Surface: * Laying A Polyurethane Surface In A Burgundy Or Brick Red Color. * Horizontal Markings (Separating Lines And Numbers) Made By Spraying In White. * The Surface Structure Must Enable The Use Of Portable Starting Blocks. * It Is Strictly Forbidden To Permanently Mount Starting Blocks And To Use Nails Or Other Mounting Elements That May Damage The Surface. B) Construction Of The Long Jump: * Construction Of The Inrun (Element Consistent With The 3-Track Track Described Above) * Construction Of A Jump With Dimensions Of 2.8 X 8.0 M Made Of A Box Filled With Sand, Thickness. 30 Cm And Lined With Separation Geotextile In A Casing With Edges Made Of Impregnated Oak Boards. * Delivery And Installation Of A Punching Board, Installed At The Surface Level, Delivered As A Ready-To-Install Product, Consisting Of A Board With The Possibility Of Laying Plasticine On Which A Shoe Mark Is Visible. C) Fencing Of The Area: * Delivery And Installation Of A Panel Fence With A Height Of 1.50 M And A Total Length Of 127.20 M. 3. The Subject Of The Order Also Includes: 1) In The Field Of The Electrical Industry (Replacement Of Lighting): As Part Of The Task, A Total Of