Bids Are Invited For Price Registration Aimed At Future And Eventual Acquisition And Installation Of Outdoor Gym Equipment, To Be Installed In Squares And Other Public Spaces.
Bids Are Invited For Price Registration Aimed At Future And Eventual Acquisition And Installation Of Outdoor Gym Equipment, To Be Installed In Squares And Other Public Spaces.
Outdoor Gym Device – Double Exercise Bikeoutdoor Gym Device – Double Exercise Bike Supply And Installation Of Outdoor Gym Device – Double Stair Simulator. Equipment Intended For Outdoor Physical Exercise, Allowing The Simultaneous Use Of 02 (Two) Users. Device Made Of Carbon Steel, With Main Structure Made Of Round Tube Of At Least 3 ½ Inches X 2.00 Mm And Secondary Structure Of Round Tubes Of 2 Inches X 2.00 Mm, 1 ½ Inch X 2, “U” Shaped Calendered Plate Of 40 It Has Four Double Bearings, Two Measuring 30 X 62 Mm And Two Measuring 20 X 42 Mm, Fixed Using Galvanized Screws And Nuts, With A 250 X 30 Mm Drawn Round Bar Shaft. It Has Four Hollow Treads, With Rounded Edges And No Corners, Measuring Approximately 140 X 320 X 2, Four Rubber Handles Of At Least 1 ¼ Inch Inches. It Has A Flange For Fixing To The Ground With Minimum Dimensions Of 250 X 4, Containing Four Ovalized Holes Of 30 X 20 Mm, For Fixing With Galvanized Parabolt Anchors Of At Least 5/8 Inch Mig Welding Process Throughout The Structure. It Has A Bench With A Back, Made Of Carbon Steel Sheet, Providing Comfort And Safety To The User, As Well As Support For The Hands, Made Of Resistant And Non-Slip Material, Integrated Into The Structure Of The Equipment, Guaranteeing Stability And Correct Posture During Exercise, Outdoor Gym Equipment: Barbell Exercise Equipment With 03 (Three) Heights. 03 (Three) Heights. Supply And Installation Of A Structure With Approximate Dimensions Of 2.60 M In Height, 0.25 M In Width And 3.55 M In Length, Consisting Of Exercise Bars With Heights Of 1.80 M, 2.20 M And 2.60 M, Measured From The Finished Floor. Device Manufactured From Round Carbon Steel Tubes Measuring At Least 3 ½ Inches Mig Type Welding Throughout The Structure. It Has An Internal Built-In Plug In Injected Plastic, With A Minimum Diameter Of 3 ½ Inches And A Spherical Finish Following The External Dimension Of The Tube, In Addition To Finishes In Injected Plastic And/Or Rubberized Material. Weather-Resistant Equipment, Allowing The Simultaneous Use Of 03 (Three) Users, With A Minimum Supported Capacity Of 120 Kg Per User. Equipment With An Estimated Minimum Durability Of 10 (Ten) Years, Considering Normal Conditions Of Use And Maintenance. Finished With Electrostatic Powder Painting, Resistant To Climate Action And Uv Radiation, In Color Ral 5019 (Capri Blue).
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
