Request For Quotation Special Clothing, Miscellaneous

Leather Boots Without Internal Protective Metal Sock. The Boots Are Made Using The Method Direct Casting Polyurethane And Thermoplastic Polyurethane To The Shoe Upper Blank. As Natural Materials Are Used For The Upper Of The Shoes Leather Thickness 1.8-2.0 Mm. Semi-Blind Valve-Tongue Made Of Leather, Provides Comfort To Wear And Prevents Small Objects From Getting Inside, Splashes, Dust. The Cuff (Soft Edging) Creates Comfort And Convenience In Wearing Lining Under The Vamp Made Of Non-Woven Fabric, Lining Under The Back And Soft Edging - Canvas, Pocket Made Of Natural Split Leather. Insole Absorbs Moisture And Provides Wearing Comfort. There Is A Finish Made Of Reflective Material. Sole, Two-Layer Oil And Petrol Resistant (Resistant To Exposure To Chemical Factors - Oil, Petroleum Products). The Polyurethane Top Layer Has Shock-Absorbing Properties, Absorbs Shock Loads, And Also Gives The Shoe Lightness, Comfort And Increased Heat-Shielding Properties. Bottom Layer Made Of Wear-Resistant, Heat-Resistant, Frost-Resistant (-40°С...+120°С) Thermoplastic Polyurethane. Depth Of The Running Layer Profile (Tread) 4.5Mm Soles Provide Slip Protection Greasy Surfaces, And Located At An Angle Tread Pattern Ensures Self-Cleaning Sole From Pollution. The Shoe Sample Must Be Agreed Upon With By The Customer. Sizes: 37-1 Pair., Summer Suit (Mens), Size 56-58, Height 182-184. (Jacket + Trousers. Jacket With Zipper And A Placket With Hidden Buttons, On A Belt With Width Adjustment On The Sides Using A Velcro Patch. Central Zipper With A Windproof Placket With Velcro, Opposite Each Velcro There Are Decorative Flags. Turn-Down Collar With Colored Trim At The Edges, The Lapels Are Fastened With A Button. The Sleeves Are Folded At The Back With Velcro Fastenings, And There Is A Patch Pocket On The Left Sleeve With A Velcro Flap. Lower Patch Pockets With Velcro Flaps. Elbow Seam On The Cuffs. Belt With Elastic Inserts On The Sides. Pockets On The Left, Under The Flap. Pants With Zipper And Button Fastening. Belt With Belt Loops And Elastic Tape At The Back. Patch Pockets: Two Side, Two Back And A Pocket For A Tool. Protection Against Abrasion. Main Fabric: 70% Polyester, 30% Cotton With Water-Repellent Impregnation, Density 250 G/Sq.M. Finishing Fabric: 70% Polyester, 30% Cotton With Water-Repellent Impregnation, Density 250 G/Sq.M. Reflective Material: Tape 5 Cm Wide. Colour: Dark Blue, Trim – Bright Yellow-Green., Leather Boots With Internal Protective Metal Socks. The Boots Are Made Using The Method Direct Casting Polyurethane And Thermoplastic Polyurethane To The Shoe Upper Blank. As Natural Materials Are Used For The Upper Of The Shoes Leather Thickness 1.8-2.0 Mm. Semi-Blind Valve-Tongue Made Of Leather, Provides Comfort To Wear And Prevents Small Objects From Getting Inside, Splashes, Dust. The Cuff (Soft Edging) Creates Comfort And Convenience In Wearing Lining Under The Vamp Made Of Non-Woven Fabric, Lining Under The Back And Soft Edging - Canvas, Pocket Made Of Natural Split Leather. Insole Absorbs Moisture And Provides Wearing Comfort. There Is A Finish Made Of Reflective Material. For Protection In The Forefoot In The Design Of Boots Internal Protective Metal Socks Are Used Impact Strength 200 J (Mun 200), With Gasket Preventing The Upper Edge From Pressing On The Foot. Sole, Two-Layer Oil And Petrol Resistant (Resistant To Exposure To Chemical Factors - Oil, Petroleum Products). The Polyurethane Top Layer Has Shock-Absorbing Properties, Absorbs Shock Loads, And Also Gives The Shoe Lightness, Comfort And Increased Heat-Shielding Properties. Bottom Layer Made Of Wear-Resistant, Heat-Resistant, Frost-Resistant (-40°С...+120°С) Thermoplastic Polyurethane. Depth Of The Running Layer Profile (Tread) 4.5Mm Soles Provide Slip Protection Greasy Surfaces, And Located At An Angle Tread Pattern Ensures Self-Cleaning Sole From Pollution. The Shoe Sample Must Be Agreed Upon With By The Customer. Sizes: 43-1 Pair.