Quotation Are Invited For M Station Hrsg Tube Leak Rectification By Plugging Method

Quotation are invited for M Station HRSG Tube Leak Rectification by Plugging Method. M STATION HRSG LEAKING TUBE PLUGGING WORKTUBE AND HEADER SPECIFICATION:HEADER MATERIAL: SA106 # C HEADER SIZE: 273 X 34 MM TUBE MATE RIAL:SA210-C TUBE SIZE: 38.1 X 2.8 MMSCOPE OF WORK:##MOBILIZE MEN/EQUIPMENT##SUBMIT FOLLOWING DOCUMENTS TO OBTAIN PTW,O#METHOD STATE MENTO#RISK ASSESSMENT OF THE WORKO#TOOLBOX TALK REPORT.##ENSURE HRSG IS CORRECTLY SECURE AND SAFE TO WORK ON IN ALL RESPECTS.##ENSUR E LC, CONFINED SPACE ENTRY PERMIT AND HOT WORK PERMIT AREAVAILABLE PRIOR TO STARTING THE WORK.##IDENTIFY LEAKING TUBE.##MARK AND OPE N TOP & BOTTOM HEADER BY CUTTING WINDOW (ON TOP HEADER,LARGER WINDOW TO BE CUT INCLUDING CROSS OVER PIPE & VENT LINE)##TOP & BOTTOM HEADER CUT PLATE PREPARATION BY BEVELING & GRINDING ANDMAKE READY FOR FITTING##WELD PREPARATION INSIDE THE HEADER BY GRINDING & POLI SHING THE TUBEHOLE.##SUPPLY AND INSERT THE STEEL PLUGS AND WELDING. (SUPPLY OF PLUGS ISCONTRACTOR SCOPE)##PT OF PLUG WELDS TO CONFIR M NO CRACK PRIOR INSTALLATION OF WINDOW.(NDT WILL BE ARRANGED BY DEWA)##WELD PREPARATION ON TOP & BOTTOM HEADER WINDOW BY BEVELING, GRINDING& POLISHING (DPT WILL BE ARRANGED BY DEWA FOR TOP & BOTTOM HEADER BEVELSURFACE)##FIT BACK TOP HEADER WINDOWS AND WELD.##WELD PREPARATION, FIT-UP AND WELDING OF TOP HEADER CROSSOVER PIPE &VENT LINE,##RT OF CROSS OVER PIPE WELD JOINT. (NDT WILL BE ARRANGED B Y DEWA)##PT OF VENT LINE WELD JOINT. (NDT WILL BE ARRANGED BY DEWA)##PT & PWHT OF THE HEADER WINDOW WELD JOINT. (NDT WILL BE ARRANGE D BYDEWA)##FIT BACK BOTTOM HEADER WINDOW AND WELD.##PT & PWHT OF THE BOTTOM HEADER WINDOW WELD JOINT. (NDT WILL BEARRANGED BY DEWA)# #WELD THE FINS WHICH WERE CUT FOR LEAK IDENTIFICATION. (FINS TO BEREUSED AND IF NOT THEN FINS TO BE SUPPLIED BY CONTRACTOR)##TACK WE LDS THE INSULATION PAD BOLTS ON TOP & BOTTOM HEADER. (BOLTS TOBE SUPPLIED BY CONTRACTOR)##REFIX INSULATION PADS.##QUALIFIED JOB SUPE RVISOR TO BE ASSIGNED FOR THE JOB.##QUALIFIED & SKILLED FABRICATORS TO CARRY OUT ALL THE JOBS.##ALL WELDING TO BE CARRIED OUT BY QUA LIFIED WELDER AND AS PER WPS INACCORDANCE WITH REQUIREMENTS OF ASME CODE.##WPS, PQR & WELDER QUALIFICATION CERTIFICATES TO BE SUBMIT TED BEFORESTART OF WORK.##ALL TOOLS & TACKLES ARE IN CONTRACTORS SCOPE.##VALID TEST CERTIFICATES OF ALL LIFTING TOOLS, ELECTRICAL T OOLS/CABLESAND GAS CYLINDERS/HOSES TO BE SUBMITTED BEFORE START OF WORK.##VALID CALIBRATION CERTIFICATE OF THE WELDING MACHINES TO B E SUBMITTEDBEFORE START OF WORK.##HOUSEKEEPING AND DISPOSAL OF WASTE SHALL BE DONE AS PER DEWA RULES ONDAILY BASIS. HAZARDOUS & NONHAZARDOUS TO BE SEPARATED.##DE-MOBILIZE MEN AND EQUIPMENT AFTER COMPLETION OF THE JOB.##COMPLETION REPORT WITH PHOTOS TO BE SUBMITTE D TO DEWA.DEWA# SCOPE:-O#SCAFFOLDO#NDE. (CONTRACTOR TO PROVIDE NDE SCHEDULE IN 01-DAY ADVANCE)WARRANTY:1.#THE WARRANTY PERIOD FOR TH E WORK SHALL BE 01 YEAR FROM THE DATE OFCOMPLETION OF WORK CERTIFIED BY DEWA.2.#IN CASE OF ANY DAMAGE/DEFECT OF THE WORK CARRIED OUT UNDER THISCONTRACT WITHIN THIS WARRANTY PERIOD, THE CONTRACTOR SHALL ATTEND ANDCARRY OUT THE NECESSARY REPAIR WORK AND RECTIFY THE DEFECT WITHIN SHORTPERIOD WITHOUT AFFECTING THE PRODUCTION OF ELECTRICITY AND WATER.3.#THE CONTRACTOR MUST SUBMIT THE SERVICE ENTRY SHEET WITHIN 10 DAYS(MAX) AFTER SIGNING OF THE WORK COMPLETION CERTIFICATE BY DEWA. Qty: 1 M Station HRSG Tube Leak Rectificaiton by Plugging Method. BIDDER SHOULD BE R STAMP.( scope of work attached) [email protected] STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332600971)/$value

Refer document

FileName	File Description
Global Tender Document	addbe9ac-5aaa-4cd3-86b4-6d6e5b015ade.pdf