Tenders Are Invited For Gully Emptiers – Delivery Of A Combined High-Pressure Washing And Suction Vehicle With A Chassis Without Water Recovery

Gully Emptiers – Delivery Of A Combined High-Pressure Washing And Suction Vehicle With A Chassis Without Water Recovery. Delivery Of A Combined High-Pressure Flushing And Suction Vehicle With A Chassis Without Water Recovery To The Zwa Saalfeld - Rudolstadt. Chassis: Front Control Chassis, 3-Axle With 1 Driven Rear Axle And Steered Trailing Axle (6X2). Total Height Of The Vehicle Maximum 3,700 Mm. Diesel Engine 450 Hp To A Maximum Of 500 Hp, Suitable For The Subsequent Permanent Installation Of A High-Pressure Flushing And Suction Truck Structure, Exhaust Gas Emissions In Accordance With Euro 6 With Scr, Particle Filter And Exhaust Gas Recirculation. Pollutant Class Euro 6 Emission Level According To Directive 88/77/Eec. Suction Truck Structure: As A Fixed Structure On The Carrier Chassis For Suctioning And Transporting Feces, Liquids And Sludge Of Various Densities From Wastewater Systems. The Volume Of The Total Container, At Least 9,000 Liters, Results From The Volume Of The Water Chamber And The Mud Chamber. Cylindrical Mud Tank, The Volume Of The Water Chamber And The Mud Chamber Is Variably Divided Into 3 Positions By An Ejection Piston. The Total Weight Of The Vehicle Must Be Designed So That The Maximum Technical Total Weight Is Maintained In Every Possible Operating State. The Vehicle Components, In Particular The Cubature Of The Vehicle Body, Must Be Coordinated With This In Mind, Aiming For A Maximum Container Volume. The Conditions In Accordance With Appendix Xxi Of Section 49 Paragraph 3 Stvzo Or Din 45645 And 45648 For Noisy Vehicles Must Be Met.