Request For Quotation Goods For Kindergarten

Wiping Cloth Roll Canvas Stitched Fabric (Hpp), Non-Woven Fabric. Composition: Most Often 100% Cotton (Less Often With The Addition Of Polyester For Strength). Width: Not Less Than Cm (800 Mm). Length: Not Less Than 100 Meters. Density: Typically Ranges From 100 To 220 G/M² (The Higher The Density, The Better The Absorbency And Durability). Color: Most Often White Or Gray Stitch Frequency: 2.5 Mm - 5 Mm (More Frequent Stitching Ensures Durability)., Garbage Bags Without Ties, 35 Liters, Heavy-Duty, 50 Pcs Per Roll, Main Technical Characteristics: Garbage Bags With A Volume Of 35 Liters Are Intended For Household And Household Purposes. Made From Durable 30 Micron Thick Polyethylene, Tear And Puncture Resistant. Material: Hdpe (Low Density Polyethylene): Rustling, Thin, High Load Capacity, But Sensitive To Sharp Edges. Thickness 7–25 Microns. Ldpe (High-Density Polyethylene): Smooth, Stretchy, Tear- And Puncture-Resistant. Thickness 25–100+ Microns. Polypropylene (Pp): Construction Bags, Density From 38 To 90 G/M², High Tensile Strength. Gost 12302-2013, Rubber Gloves For Cleaning Premises. Material: High-Quality Latex (Natural Rubber), Nitrile (For Protection Against Aggressive Chemicals) Or A Combination Of Both. Inner Layer: Most Often Cotton Lining (For Moisture Absorption And Comfort) Or Cotton Lining (Lint). Texture: Ribbed (Textured) Surface On Palms And Fingers For Improved Grip. Type: Anatomical Shape (Division Into Right/Left Hand) Or Universal. Color: Most Often Yellow, Pink, Blue, Green (For Separation By Cleaning Zones). Sizes: Standard Sizes S, M, L, Xl. Protection Characteristics: Waterproof, Protection Against Weak Solutions Of Acids And Alkalis, And Household Cleaning Agents. Gost 20010-93, Dishwashing Liquid 450 Ml. Product: Dishwashing Gel, “Juicy Lemon” Is Based On A Combination Of Active Cleansing Agents And Auxiliary Components For The Aroma And Preservation Of The Product: 5–15% Anionic Surfactants: The Main Cleaning Component That Creates Abundant Foam And Effectively Breaks Down Fat Even In Cold Water. 5% Non-Ionic Surfactants: Enhances The Action Of Anionic Surfactants, Helping To Remove Difficult Impurities And Making The Formula Softer On The Skin. Preservatives: Provide A Long Shelf Life For The Product (Usually 24 Months), Preventing The Development Of Bacteria Inside The Bottle. Flavoring Additives: Give The Product A Characteristic Citrus Scent. Gost 32478-2013, Dish Sponge 5 Pcs. Sponges Made Of Large-Pored Foam Rubber, Apricot Color. Dense Abrasive (750 G/M2) Of Premium Quality. Comfortable Xl Size With Increased Thickness. 1 White Fiber Sponge For Delicate Surfaces Is Included In The Package., Kuzbasslak Bt 4.0 Liters, Black Metal Can. Kuzbasslak Bt-577 (Bitumen Varnish) Is A Black Protective Coating Designed To Protect Metal, Wood And Concrete From Corrosion And Moisture. Black (Glossy Surface). Volume: 4 Liters (Usually Weight Is About 3-3.2 Kg). Anti-Corrosion Protection Of Metal Structures, Waterproofing Of Concrete And Wooden Surfaces, Including For Outdoor Use. Drying Time: At A Temperature Of +20 °C - About 24 Hours (To Degree 3), With Hot Drying (100–110 °C) - About 20 Minutes. Gost 28196-89, Hammer Enamel Blue 2.5 Kg, Metal Can. Blue Hammer Enamel Is A Decorative And Protective Coating For Metal That Creates A Hammered Texture (Hammer Marks). It Hides Defects, Has Anti-Corrosion Properties, And Is Suitable For External And Internal Work (Gates, Fences, Safes). The Base Is Most Often Alkyd, Drying Time Is Up To 24 Hours. Level Of Gloss: Glossy, Less Often Semi-Matte/Muted Gloss (Effect 66 According To The Gloss Meter). Base: Alkyd, Acrylic Or Synthetic. Room Type: Wet And Dry Rooms, Outdoor Work. Purpose: Metal (Including Rusty), Wood. Properties: Heat Resistance (Up To +80°C...+150°C), Moisture Resistance, Wear Resistance. Rust Protection: Can Be Applied Directly To Rusty Surfaces. Concealment Of Defects: Thanks To The Relief Structure, It Hides Metal Irregularities. Quick Drying: Some Types Dry “Touch” In 20-30 Minutes (Complete Drying Up To 24 Hours). Gost 28196-89, Flat Brush *Kp*-14*Flat, Mixed Bristles No Less Than 100 Mm, Brown Enamel Pf-115 In 2.8 Kg Packaging, Metal Can, Often Indicated As 2.8 Kg, Which With The Density Of Alkyd Enamels Approximately Corresponds To A Volume Of About 2-2.5 Liters, But Is Usually Packaged In Cans - This Is A Universal Alkyd Paint For External And Internal Work Consumption Per Layer: 100–180 G/M² (Depending On The Application Method, Surface Structure And Color). Packaging: Metal Can, Weighing 2.8 Kg. Gost 28196-89, Toilet Paper Naberezhnye Chelny Without Sleeve, Single-Layer, Color: Gray, Without Sleeve, Roll Length No Less Than 53 M, Width No Less Than 92, 48 Pieces Per Pack St Rk Gost R 52354-2008, Solvent 646 1 Liter Bottle, Density 0.87 G/Cm3. Boiling Point (Celsius) 59 Flash Point 6 Self-Ignition At 428 Mass Fraction Of Liquid, Calculated Using The Fischer Formula, Does Not Exceed 2% Volatility 8-15 Acid Number, Not More Than 0.06 Coagulation 35%, White Enamel Pf-115 20 Kg, Metal Bucket. Characteristics: Universal Alkyd Enamel For Exterior And Interior Use (Metal, Wood, Concrete). Glossy, Weather-Resistant, Resistant To Moisture And Detergents. Consumption Is 100–180 G/M² Per Layer, Touch-Drying Time Is About 6-24 Hours. Provides A Durable Coating With Good Hiding Power. Alkyd Enamel (Based On Pentaphthalic Varnish). Gloss Level: Glossy Drying Time: At Temperatures Up To 24 Hours (Full), Up To 6-8 Hours Between Coats. Consumption: 100–180 G/(In One Layer), Depends On The Application Method. Thinner: White Spirit, Solvent, Turpentine. Color: White (Resistant To Yellowing). Application And Benefits: Scope Of Application: Painting Metal, Wood, Concrete And Plastered Surfaces. Suitable For Residential And Industrial Premises, Exterior Painting. Advantages: High Hardness (0.15-0.2 Cu), High Adhesion, Excellent Hiding Power, Glossy Effect, Resistance To Weathering And Temperature Changes. Gost 28196-89