Tenders Are Invited For Delivery Of Waste Containers As Part Of The Modernization And Retrofitting Of The Selective Municipal Waste Collection Point In Jackowo.

1. The Subject Of The Order Is The Purchase And Delivery Of 12 Pieces Of Brand New Metal Containers Intended For Collecting Municipal Waste.2. Technical Parameters Of The Subject Of The Order:• Kp-15 Steel Containers,• Adapted For Transport In A Hook System With A Hitch Height Of 1200 Mm In A Car With Internal Hydraulic Protection Volvo Fmx D11 Vtc3r With Skibicki Hks-12 Body,• Capacity: 15 - 16.5 M3,• Internal Dimensions Of The Container: - Length: 3700 Mm - 3900 Mm - Width: 2200 Mm - 2300 Mm - Height - 1650 Mm - 1850 Mm (Resulting From The Capacity Of The Container - Calculated To Obtain A Capacity Of At Least 15 M3), • Hook 1200 Mm - Reinforced With Upn120, • Hitch Hook Min. Rod Ø35 Mm, Grade S355, • Bottom Of The Container Made Of Sheet Metal With A Thickness Of Min. 4 Mm, Ribbed, • Side Edges Of The Floor Rolled Radially Towards The Side Walls Of The Container Or Bent Twice At An Angle Of 45 Degrees, • Thickness Of Side Wall And Door Sheet Metal Min. 3 Mm, • Runner Material: Upn 160 Channel Or Ipn 160 I-Beam, • Runner Spacing: 1020 Mm, • Rim: Profile Min. 60X40x3mm, • Side Reinforcement Every 600-800 Mm: C-Section With Min. 80X50x3mm, • Floor Reinforcement: C-Section With Min. 80X50x3mm, • All Elements Welded With Continuous Welding, • The Interior Of The Container Protected With An Anti-Corrosion Coating, • External Walls Protected Against Corrosion By Painting With Primer And Topcoat, • Double-Leaf Gates For Min. Three Double Hinges, Each Equipped With A Grease Nipple, Independently Closed Left And Right Sides, • Rear Door Lock - Central Locking System, • Additional Central Lower Lock For Each Door - Safety Lock, • Tarpaulin Mounted On The Shorter Side. Rolling Tarpaulin, Aluminum Pipe, Folding Crank, Belts With Tensioners, • Tarpaulin Hooks Placed Around The Perimeter Of The Container Below The Upper Edge Every 30-50 Cm, • Ladder On The Front Wall, • Equipped With 8 Reflectors (2 On Each Side), • All Moving Elements Equipped With Grease Nipples.3. General Requirements:• Containers Must Be: - Made Of Materials That Do Not Contain Cadmium, Lead And Other Elements Harmful To The Environment, - Resistant To Changes In Temperature, Humidity, Uv Radiation, - Resistant To Chemical Compounds And Corrosion, - Made In Accordance With The Kp Standard, • Each Container Must Be Equipped With A Nameplate Made Of A Corrosion-Resistant Material (E.G. Stainless Steel Or Aluminum), Permanently Attached (Riveted) To The Container Structure In A Visible Place (Recommended: Hook Eye Area Or Rear Post). The Plate Must Contain Legible, Stamped Or Engraved Data: - Name And Address Of The Manufacturer, - Model/Type Of Container (E.G. Kp-15), - Serial/Factory Number, - Year Of Production, - Nominal Capacity In M³, - Empty Weight (Tare) In Kg, - Permissible Total Weight (Gvw) Or Maximum Load Capacity In Kg. The Ordering Party Requires That The Serial Number Be Permanently Marked On The Sides Of The Container (E.G. By Welding Or A Knockout On The Frame/Stringers), W