Nnc. Functional, Technical, Quality And Performance Characteristics: Soldering Table 200X200 Mm 800 W Aluminum Heating Uniform Heating Of The Surface 200×200 Mm, Power 800 W For Fast Soldering, Ceramic Heating Element, Precise Thermostat (Up To 400°C), Portability And Safety (Protection From Overheating), Weight Of The Soldering Table Is Not Less Than 2400 G Length At Least 200 Mm Width At Least 200 Mm Supply Voltage 220 V Material: Aviation Aluminum Complete Set: Heating Table, Power Cord, Manual Certificates., Nnc. Nickel Tape (2M X 0.12Mm X 8Mm) For Assembling Batteries From Individual Batteries By Soldering And Contact Welding Cross-Section Not Less Than 0.12×8 Mm Load Current Not Less Than 15 A. Dimensions No Less Than 2000 X 8 X 0.12 Mm Weight Not Less Than 10 G Gost 6235-91 Certificates., Nnc. Pvc Heat-Shrink Sleeve For Packaging Batteries, Width 100 Mm, Diameter 50 Mm, Color Blue Shrinkage Ratio 2:1 Diameter No Less Than 102 Mm Operating Temperature Range -40…+105 °C Length Not Less Than 14±5% M Material Pvc (Polyvinyl Chloride) Shrinkage Temperature 80 °C Thickness Not Less Than 0.08 Mm Transport Packaging: Size/Quantity 30*30*36/10 Packaging Roll Width Not Less Than 160 Mm Weight Not Less Than 1.24 Kg Gost 17675-87 Certificates., Nnc. Pvc Heat-Shrink Sleeve For Packaging Batteries, Width 200 Mm, Diameter 150 Mm, Color Blue Shrinkage Ratio 2:1 Diameter No Less Than 102 Mm Operating Temperature Range -40…+105 °C Length Not Less Than 14±5% M Material Pvc (Polyvinyl Chloride) Shrinkage Temperature 80 °C Thickness Not Less Than 0.08 Mm Transport Packaging: Size/Quantity 30*30*36/10 Packaging Roll Width Not Less Than 160 Mm Weight Not Less Than 1.24 Kg Gost 17675-87 Certificates., Nnc. Heat-Shrinkable Pvc Sleeve For Packaging Batteries, Width 160 Mm, Diameter 102 Mm, Color Blue Shrinkage Ratio 2:1 Diameter No Less Than 102 Mm Operating Temperature Range -40…+105 °C Length Not Less Than 14±5% M Material Pvc (Polyvinyl Chloride) Shrinkage Temperature 80 °C Thickness Not Less Than 0.08 Mm Transport Packaging: Size/Quantity 30*30*36/10 Packaging Roll Width Not Less Than 160 Mm Weight Not Less Than 1.24 Kg Gost 17675-87 Certificates., Nnc. Circuit Board At Least 7X9 Cm, Single-Sided Printed Circuit Board (Pcb) 7 By 9 Cm, Metallized Holes, Additional Contact Pads Along The Edges, Pitch Of At Least 2.54 Mm. For Electrical And Mechanical Connection Of Various Electronic Components. Material: Single-Sided Foil Bakelite Thickness Not Less Than 1 Mm. The Distance Between The Holes Is Standard 2.54 Mm. Gost 23752-79 Certificates., Nnc. Ed 20 Resin With Hardener Type Of Use: Universal, Type Of Adhesive Product: Insulating Materials Mass Fraction Of Epoxy Groups: 20.0–22.5%. Dynamic Viscosity (At 25°C): 13–20 Pa S. Mass Fraction Of Saponified Chlorine: No More Than 0.3% Mass Fraction Of Volatile Substances: No More Than 0.2% (Highest Grade). Gelatinization Time (With Hardener): At Least 4–8 Hours. Density 1.11-1.23 G/Cm³ High Hardness And Compressive Strength (100-200 Mpa) Gost 10587-84 Certificates.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
