Bids Are Invited For Acquisition Of A General Distribution And Command Board (Qgd) To Be Used In The Electrical Installations Of The X-Ray Machine And The Autotransformer In The Room Of The Pio Damião Nurse Specialties And Diagnosis Center, Located At Avenida Presidente Tancredo Neves 1387, Jardim Vera Cruz, Guaxupé-Mg.

General Distribution And Command Board (Qgd) General Distribution And Command Board (Qgd), Infrastructure And Signaling For The Equipment: 2. Technical Specifications Of The Board (Qgd-380V/220V) The Board Must Be Of The Overlapping Type, With Dimensions Of 800X600x300mm. Internal Assembly Must Strictly Follow The List Of Components And Project Symbols: •Dj01 (General Circuit Breaker): Thermomagnetic Tripolar Circuit Breaker, In = 125A. •Dj02: 6A Mini Thermomagnetic Monopolar Circuit Breaker. •Dj03 (Dr Protection): Thermomagnetic Tetrapolar Circuit Breaker, Dr 80A – 300Ma. •Dj04: 4A Thermomagnetic Monopolar Circuit Breaker. •Dj05: 20A Thermomagnetic Monopolar Circuit Breaker. •C1 (Power): Power Contactor In = 90A. •Ca01/Ca02 (Auxiliary): 220V Auxiliary Contactors (2Na+2Nf And 3Na+1Nf). •F1/2/3: Diazed Set With 4A Protective Cover. •Rf01: Phase Lack Relay (With Or Without Neutral). •Ud1508-40: Interface And Command Module. •Front Signaling: H01/02/03 Signalers (Red/Yellow/Green) For Indications Of Phase Lack And Switch On Command. •Commands: Double Control Set (B1/B0) And Single Control Button (B2) For Lamp Testing. •Ventilation: Ventilation Set Ve01 (Without Grille). •Busbars: Electrolytic Copper 3/4 X 1/4 For Phases, Neutral And Earth. •Connectors: Model Sak 35 (X0/1/2/3/Pe) And Sak 2, 5 (X1/1/N/Pe). •Finish: Pvc Channels Measuring 50X80 And 50X50.. 3. Safety Signage •Supply And Installation Of 02 (Two) Red Led Luminaires Including Conduit And Connections For Indicating X-Rays In Operation. •The Luminaires Must Be Installed Over The Two Entrance Doors To The Room.

17,700 - BRL

FileName	File Description
Global Tender Document	d7ebb600-e32c-4d28-98a8-541a37e57ca3.html