Tenders Are Invited For Load-Bearing Structure Design Services – Planning Services (Structural Planning) For The New Construction Of A Community And Clubhouse In Nideggen-Schmidt-Stadt Nideggen

Load-Bearing Structure Design Services – Planning Services (Structural Planning) For The New Construction Of A Community And Clubhouse In Nideggen-Schmidt-Stadt Nideggen. A Building With A Total Gross Floor Area Of ​​Approximately 1,500 Square Meters Is To Be Planned. In Particular, A Multifunctional Community Hall Of Around 340 Square Meters Is To Be Designed In This Building And, In Addition, Three Smaller, Multifunctional Rooms, A Café With The Necessary Ancillary Rooms, A Tourist Information Center And Storage Rooms For The Clubs Are To Be Planned. In Addition, The Required Sanitary And Technical Rooms Must Be Planned As Specified In The Room Program. When Planning, A Room Height Of Approx. 3.5 M Should Be Assumed; The Hall Should Be Planned With A Room Height Of Approx. 7.0 M. Accessibility Must Be Guaranteed For The Entire Building In Accordance With Section 49 Para. 2 Bauo Nrw. There Is A Terrace For The Café And A Childrens Playground In The Outdoor Area. The Energy Supply To The Community Hall Should Preferably Come From Regenerative Systems Such As Photovoltaic Systems And Heat Pump Technology (Geothermal Energy Or Air Heat). The Requirements For Implementing Pv Systems Both On The Building Roof And In The Parking Space Area Must Be Observed. The Relevant Property Planning Services Have Already Been Awarded. The Contractor Must Provide All Basic Services Required To Achieve The Planning And Monitoring Objectives Defined In The Documents In Service Phases 1 To 6 Of The Structural Planning Service Profile In Accordance With §§ 49 Ff. Haoi 202; In Conjunction With Appendix 14; Lph 1-6