Request For Quotation Purchase Of Spare Parts For The Model 80 Armored Personnel Carrier According To The Customer’S Technical Specifications

Fine Fuel Filter, Article No. 7401117040-01 Filtration Material – Highly Porous Filter Cardboard Or Phenol-Formaldehyde Impregnated Paper Filtration Fineness – Minimum 3.5, Maximum No More Than 10 Overall Dimensions -165+- 2Mm Outer Diameter – 80-84Mm Inner Diameter – 33-34Mm Throughput – At Least 1.5 L/Min The Complete Set Requires A Set Of Rubber Seals (Body Rings And Small Rod Rings). Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Compressor 2-Cyl. (275 L/Min 2.45 Kw), Article No. 53205-3509015 This Compressor Operates The Brakes And Regulates Tire Pressure. Type - Piston, Two-Cylinder, Single-Stage Productivity - 275-290 L/Min Power Consumption – 2.45Kw Cylinder Diameter – 60 Mm Cooling – Liquid Pressure Lubrication Drive - Gear Body Material - High-Strength Cast Iron Or Aluminum Alloy With Pressed Cast Iron Sleeves Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 1402.3737 Designed To Quickly Disconnect The Battery From The On-Board Network, Both From The Driver’S Seat (Using A Button) Rated Voltage – 24 V Rated Current – 50 A Maximum Current – Up To 1000 A Type Of Electromagnet Consumption – No More Than 5 A Weight – 1.5 Kg Tightness - The Housing Must Be Dust- And Splash-Proof With A Degree Of Protection Of At Least Ip54 The Power Bolts And Contact Disk Must Be Made Of High Quality Electrical Copper. It Is Mandatory To Have A Button Protected By A Rubber Cap On The Device Body. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Engine Repair Kit, Article No. 7403-1000002 Sealing Of Head Liners Only Fluorine Rubber Or Heat-Resistant Silicone Head Gaskets 8Pcs Reinforced Paronite With Metal Edging For All Functional Holes Gas Joint Rings 8Pcs Steel With Copper Plating/Coating Manifold Gaskets Made Of Steel-Asbestos Or Steel-Asbestos Sheet With Increased Fire Resistance The Pan Gasket Is Made From A Rubber-Cork Mixture Seals Front/Rear Silicone Or Fluorine Rubber With Dust-Proof Edge Contents Of A Complete Repair Kit 1) Cylinder Head Group: Head Gaskets, Covers, Gas Joint Rings, Valve Caps (16 Pcs) 2) Cpg Group: Sealing Rings Of Sleeves (24 Pieces - 3 Sleeves Each) 3) Timing Group: Gaskets For Front And Rear Block Covers. 4) Lubrication System - Thought Pump Filter Pan Gasket 5) Cooling System - Gaskets Of The Water Pump, Thermostats, Pipes 6) Fuel System - Copper Washers, Injectors And Injection Pump Gaskets 7) Turbocharging - Gaskets Of Turbochargers, Drain Pipes And Manifolds Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.