Request For Quotation Purchase Of Spare Parts For The Model 80 Armored Personnel Carrier According To The Customer’S Technical Specifications

Air Filter Filter Element, Article No. 740,1109560 The Set Consists Of A Main And Control Element The Element Is A Cylindrical, Corrugated Curtain Made Of Special Filtered Paper, Reinforced With Metal Mesh Overall Dimensions - 400-410Mm X250-260Mm Inner Diameter – 130-150Mm Filtration Material – Highly Porous Paper Degree Of Air Purification – No Less Than 99.55% Construction – Metal, Outer And Inner Casing, Polyurethane End Caps Quality Of Corrugation - Uniform Distribution Of Paper Curtains Without Sticking; Curtains Must Be Firmly Fixed With An Adhesive Seam Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 14.1601094 Drive Middle Disk Type – Cast Iron With Automatic Adjustment Mechanism To The Middle Position Feature – Equipped With 4 Lever Mechanisms With Springs Outer Diameter – 350 Mm Material: Special Gray Cast Iron With High Thermal Conductivity Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Oil Filter Filter Element Assembly, Article No. 740-1012040 Type Size – Height 200-205Mm Outer Diameter -100-103Mm Construction Type - Replaceable Paper Element With The Rest Of The Internal Frame And Metal Covers Filtration Material – Highly Porous Filter Paper With Final Impregnation Nominal Filtration Fineness 25-40 Μm Completeness: Each Element Must Be Supplied With A Set Of Sealing Gaskets (Body Rings And Small Ring) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Anti-Freeze Fuse, Article No. 1003536010 The Device Is A Reservoir With A Wick Mechanism And A Bypass Valve Working Pressure – 0.8 Mpa Tank Capacity – 0.2-1 L Working Fluid - Technical Ethyl Alcohol Control Type – Manual Connecting Thread – M22x1.5 Temperature Range – From -50С To +80С Housing Material – Cast Aluminum Alloy Without Porosity Or Cracks The Kit Is Supplied Complete With A Cup Sealing Ring And A Control Handle. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00.