Request For Quotation Purchase Of Goods (Security Equipment And Video Communications) For The Needs Of The Armed Forces Of The Republic Of Kazakhstan

Video Intercom Kit. Equipment: Monitor 1Xvdp-H2111w/ Calling Panel 1Xvdp-D2211/ Canopy 1Xds-Kabv6113-Rs/2X Power Supply, Type Of Communication - Simultaneous Transmission And Reception, Installation Method - Network Technology, Control - Touch. Inclusive Email Lock With Installation. Installation And Integration Of An Electronic Lock (Electromechanical Or Electromagnetic) With A Relay Of A Video Intercom Calling Panel For Remote Opening Of A Door/Wicket/Gate From The Monitor, The Hik-Connect Mobile Application And Using Mifare Cards. Wi-Fi 2.4 Ghz Support On The Monitor And Calling Panel. The Distance Between The Monitor And The Calling Panel Is Up To 80 M (By Air). • Electromechanical Lock (Electric Strike) - 12 V, Current Consumption Up To 0.5–1 A (Recommended). • Exit Button Is Normally Open (No). • Door Opening Sensor (Door Contact) - Magnetic Reed Switch (Optional, To Monitor The Door Status). Additional Equipment: • Poe Injector Or Poe Switch (If Poe Power Is Used). • Utp Cat5e/Cat6 Cable For Ethernet (Between Monitor And Call Panel). • Lock Cable: 2-Wire (For Relay) + Lock Power (Cross-Section ≥0.75–1.5 Mm² Depending On Distance). • 12 V Dc Power Supply For The Lock (Separate If The Lock Current Is >2 A Or The Distance Is Large). Connection Diagram 1. Power And Network: • Calling Panel: Poe From An Injector/Switch Or 12 V Dc. • Monitor: 12 V Dc Or Poe + Wi-Fi For Remote Access. 2. Connecting An Electronic Lock (To The Calling Panel): • Lock Relay On The Panel (Terminals: No / Com / Nc). • Power Supply To The Lock (+12 V From A Separate Power Supply) → Through The Panel Relay (Com + No) → Lock. • When The Relay Is Triggered (From The Monitor Or Via The Card), The Circuit Closes → The Lock Opens For 3–10 Seconds (Adjustable). • For An Electromagnetic Lock: • The Panel Relay Is Used To Open The Locks Power Circuit (Nc Mode) When Opening. • Exit Button: In Parallel With The Relay (To The Corresponding Panel Terminals). (Installation And Commissioning Including Consumables)., Electromagnetic Lock With Installation. Installation And Integration Of An Electronic Lock (Electromechanical Or Electromagnetic) With A Relay Of A Video Intercom Calling Panel For Remote Opening Of A Door/Wicket/Gate From The Monitor, The Hik-Connect Mobile Application And Using Mifare Cards. Wi-Fi 2.4 Ghz Support On The Monitor And Calling Panel. The Distance Between The Monitor And The Calling Panel Is Up To 80 M (By Air). • Electromechanical Lock (Electric Strike) - 12 V, Current Consumption Up To 0.5–1 A (Recommended). • Exit Button Is Normally Open (No). • Door Opening Sensor (Door Contact) - Magnetic Reed Switch (Optional, To Monitor The Door Status). Additional Equipment: • Poe Injector Or Poe Switch (If Poe Power Is Used). • Utp Cat5e/Cat6 Cable For Ethernet (Between Monitor And Call Panel). • Lock Cable: 2-Wire (For Relay) + Lock Power (Cross-Section ≥0.75–1.5 Mm² Depending On Distance). • 12 V Dc Power Supply For The Lock (Separate If The Lock Current Is >2 A Or The Distance Is Large). Connection Diagram 1. Power And Network: • Calling Panel: Poe From An Injector/Switch Or 12 V Dc. • Monitor: 12 V Dc Or Poe + Wi-Fi For Remote Access. 2. Connecting An Electronic Lock (To The Calling Panel): • Lock Relay On The Panel (Terminals: No / Com / Nc). • Power Supply To The Lock (+12 V From A Separate Power Supply) → Through The Panel Relay (Com + No) → Lock. • When The Relay Is Triggered (From The Monitor Or Via The Card), The Circuit Closes → The Lock Opens For 3–10 Seconds (Adjustable). • For An Electromagnetic Lock: • The Panel Relay Is Used To Open The Locks Power Circuit (Nc Mode) When Opening. • Exit Button: In Parallel With The Relay (To The Corresponding Panel Terminals). (Installation And Commissioning Including Consumables).