Bids Are Invited For Supply Of Personal Protective Equipment - Municipal Department Of Administration And People Management

Lot 1 - Helmet Helmet For Protection Against Impacts: - 200 (Two Hundred) Units; - Safety Helmet, Type Ii, With Protection Against Impacts On Both The Top And Side Of The Head, Made Of High Dielectric Resistance Material, Equipped With A Front Flap For Sun And Splash Protection, Side Slits Or Fittings To Accommodate Earmuffs And/Or Visors. - It Must Have Adjustable Internal Suspension, With At Least 4 (Four) Attachment Points, Made Of Fabric, A “Ratchet”, “Securefit” Or “Push Key” Adjustment System And A Fabric Jugular Strap. - Class: E – Electrical Protection According To Abnt Nbr 8221 And Ansi/Isea Z89.1 Standard Specifications. - Minimum Required Characteristics: -- Hull Material: High Density Polyethylene (Hdpe) Or Abs; -- Resistance To Vertical And Lateral Impact; -- Penetration Resistance; -- Forehead With Sweat Absorber; -- Comply With Abnt Nbr 8221 And Ansi Z89.1 Standards; -- Possess A Valid Ca (Certificate Of Approval) Issued By Mte. - The Epi Must Contain At A Minimum Markings Containing: The Commercial Name Of The Manufacturer Or The Importer, The Manufacturing Batch And The Ca Number - Mandatory Of The Same Brand Or Compatible With The Other Items In This Lot., Lot 3 - Balaclava For Low Temperature Hood To Protect The Skull And Neck Against Thermal Agents – Cold - 10 (Ten) Units; - Protective Balaclava Made From Suedine Fabric, With A Mixed Composition (Cotton And Polyester), Malleable And Comfortable. It Has An Anatomical Shape For Full Coverage Of The Head, Neck And Part Of The Face, Allowing Use In Conjunction With Safety Helmets And Other Epis. - Minimum Required Characteristics: - Medium Weight Suedine Fabric, Which Provides Moderate Thermal Insulation; - Good Breathability And Softness, Reducing Discomfort During Prolonged Use; - Reinforced Seams, Without Stitches That Cause Irritation To The Skin; - Anatomical Adjustment, Guaranteeing Stability Without Excessive Compression; - Protection Against Low Temperatures In Cold Rooms Or Refrigerated Environments; - Size: One Size, With Elasticity For Adaptation; - Possess A Valid Ca (Certificate Of Approval) Issued By Mte. - The Epi Must Contain At A Minimum Markings With: The Commercial Name Of The Manufacturer Or The Importer, The Manufacturing Batch And The Ca. Number, Lot 1 - Helmet Suspension Helmet Suspension: - 200 (Two Hundred) Units; - Suspension Made Of Fabric; - Adjustable; - Minimum 4 (Four) Attachment Points; - Adjustment System In “Ratchet”, “Securefit” Or “Pushkey”; - Mandatory Of The Same Brand Or Compatible With The Other Items In This Lot; - Note: The Ca – Certificate Of Approval For This Item Is The Same As The Helmet To Be Purchased, As They Are An Integral Part Of The Same Set Of Equipment., Lot 2 - Parachutist-Type Safety Belt Parachutist-Type Safety Belt With 3 Attachment Points (Back And Side): - 70 (Seventy) Units; - Comply With The Provisions Of Nr 06 (Epi), Nr 35 (Work At Height); - Have A Valid Ca (Certificate Of Approval) Issued By The Mte; - Compliance With Abnt Nbr 15835/2010 And 15836/2010; - Construction And Material: -- Made From High Tenacity Synthetic Fabric (Eg: Polyester) Resistant To Abrasion, Traction And Weathering; -- Padding In The Lumbar Region (Waist) And Thighs; -- Reinforced Seams With High Resistance Thread; - Anchor Points: -- 1 (One) Dorsal Point For Fall Retention; -- 2 Side Points In The Waist Region For Positioning