Bids Are Invited For Price Registration For Future And Possible Acquisition Of Road Signaling Materials On The Streets Avenida In The Municipality Of Juara-Mt, In Support Of The City Municipal Secretariat, In Accordance With The Specifications And Technical Conditions Contained In This Notice And Its Annexes.

Yellow Acm Sheet 1.22 M Wide X 5.0 M Long For Making Road Signage Board. 3Mm Composite Aluminum Material – Requirements And Test Methods – Abnt Nbr-16179:2021., Red Acm Sheet 1.0 M Long For Making Road Signage Plate. 3Mm Composite Aluminum Material – Requirements And Test Methods – Abnt Nbr -16179:2021., White Acm Plate 1, Green Acm Plate 1, Adhesive – Non-Retroreflective Film Type Iv Nbr 14.644:2013 In Black In Coils 62 Cm Wide. The Black Film Must Be Made Of Pvc, Specially Designed To Form Legends, Used In The Production Of Reflective Signs For Road Signs. 14.644:2013 Yellow Color Coil 62 Cm Wide., Adhesive – Retroreflective Film Engineering Grade Type I Nbr 14.644:2013 White Color Coil 62 Cm Wide., Pantographic Barrier Composed Of 16 Pieces Of Orange Polyethylene And 28 Reflective Strips. Height Of The Folded Piece 1170 Mm, Length With Maximum Folding 6400 Mm, Total Weight 15.5 Kg And Metal Support Feet, Traffic Sign Cones 75 Cm High. Road Safety And Signaling Cones Made Of Semi-Flexible Polyethylene, With Rubber Base, Dimensions Of 40 White 280, White Body, In Compliance With Abnt Nbr 14636/2021, Made Of Inorganic Organo Material Based On Synthetic Resins And Filling Materials Made Of Permanent White Minerals, Containing On The Base Steel Structure 1010/1020, Nylon Screen, For Impact Absorption, And Two Fixing Pins With Cross Bar Made Of Of Full Thread Screws, Steel 1010/1020, With Protection Against Oxidation, Must Be An Integral Part Of The Tack Body, In The Same Material, Eliminating Any Form Of Fixation Between The Pins And The Tack After Manufacturing. Dimensions: Minimum Height Of 1.7 Cm And Maximum Of 2.2 Cm Side 1: Retroreflective Minimum Of 9.6 Cm And Maximum Of 13.00 Cm And Side 2: Minimum Of 7.4 Cm And Maximum Of 11.0 Cm, Screws Of Thickness 1 ½ In Length 8 Mm, Thread To Fix The Plate, Galvanized Steel, French Head Type. Box With 100 Units, Washers For 1 ½ Thick Screws To Fix The Galvanized Steel Plate, French Head Type With A Minimum Thickness Of 8 Mm. Box With 200 Units, Nuts For Screws Of 1 ½ Thickness To Fix The Galvanized Steel Plate, Metal Tube For Fixing 3.5 M Long Signage Plates, Hot-Dip Galvanized Steel Tube, With External Diameter Of 2.5 Inches, 3.0 Mm Wall, With Pvc Plug At One End And Device Anti-Turn On The Other., Zebrad Tape For Demarcation, 70 Mm X 200 M., Masking Tape 48Mm X 50M.