Bids Are Invited For Electrical Quarterly Analyzer - Demand For Equipment For Measuring And Monitoring Electrical Quantities, Aimed At Supporting The Institutions Technical And Operational Activities.Electrical Quantity Analyzer Measurement Capacity: The Equipment Must Perform Measurements In Single-Phase, Two-Phase And Three-Phase Systems, Using True Rms Technology To Guarantee Accuracy In Distorted Waveforms.

Electronic Equipment Electronic Equipment - Electrical Energy Analyzer Type: Digital Voltage Measurement: 660 V Measurement And Current: Up To 2000 A Frequency: 50/60 Hz Power Supply: 90 To 250 V • Electrical Quantity Analyzer Measuring Capacity: The Equipment Must Carry Out Measurements In Single-Phase, Two-Phase And Three-Phase Systems, Using True Technology Rms To Ensure Accuracy In Distorted Waveforms. • Current Range: Minimum Current Measurement Capacity Of Up To 2000 A. • Voltage Range: Compatibility With Low Voltage Systems, Allowing Measurements Of Up To 660 V Phase-To-Phase. • Measurement Of Electrical Quantities: Complete Measurement Of Voltage, Current, Active, Reactive And Apparent Power, In Addition To The Power Factor. • Power Quality Analysis: Capability Of Harmonic Analysis, At Least Up To The 32Nd Order, And Calculation Of Total Harmonic Distortion (Thd). • Recording Of Electrical Events: Detection And Recording Of Events Such As Dips, Overvoltages And Electrical Transients. • Internal Memory: Data Storage For Offline Operation, Allowing Later Export Of Records. • Communication Interface: Availability Of At Least One Of The Following Interfaces: Ethernet, Wi-Fi And/Or Mobile Network, For Transmission And Integration Of Collected Data. • Measurement Accuracy: Accuracy Compatible With Energy Analysis, With Typical Error Equal To Or Less Than 1%. • Regulatory Compliance: Compliance With Applicable Technical Standards, Such As Iec 62052, Iec 62053, Iec 61010 Or Equivalents, In Addition To Relevant National Standards (Abnt Nbr 14519, Abnt Nbr 5410). • Electrical Supply: Operation Compatible With Low Voltage Networks, Approximately From 90 To 250 V, Guaranteeing Adequate Autonomy For Use In The Field. • Operating Range: Robust Design And Suitable For Field Conditions, With Mechanical Resistance And Weather Protection As Per Institutional Needs.