Bids Are Invited For The Municipal Department Of Education Of Boca Da Mata Identified The Need To Acquire School Furniture, Including School Sets, Cafeteria Sets (Children And Adults) And Childrens Cribs, Intended To Serve The Units That Are Part Of The Boca Da Mata Municipal Public Education Network, Linked To The Boca Da Mata City Hall. Expansion Of Demand Resulting From The Increase In The Number Of Enrollments And The Expansion Of Educational Units. It Is Noteworthy That School Furniture Is An Essential Element To Guarantee Comfort, Safety, Ergonomics And Organization Of Environments, Favoring The Development Of Pedagogical Activities And Adequate Assistance To Students, Especially In Early Childhood Education. With Regard To Cafeteria Sets, Their

School Chair, With Adjustable Front Clipboard, Made Of Thermoplastic Resin. Made By Screws. Tube Closing Tips: Produced In Thermoplastic Resin And Fitted To The Structure. Load Capacity: 120 Kg; -Minimum Backrest Width: 40 Cm; -Minimum Backrest Height: 24 Cm; - Minimum Seat Width: 40 Cm; - Minimum Seat Depth: 40 Cm; - Front Arm Size 56X38x Seat-To-Floor Height: 0.46Cm - Thermoplastic Resin Book Holder. Variations In Measurements Of Up To 5% Are Allowed. Anti-Slip Tips Completely Involving The Tubes That Make Up The Feet (To Avoid Corrosion Of The Feet), Performing The Function Of Protecting The Paintwork And Preventing Rust, The Metal Structure From The Seat To The Back Is Made From 25X25 Industrial Steel Tube And The Metal Structure From The Seat To The Floor Is Made From Oblong Tube 29X58 And Round Tube 1, Plate 18, Treated By Sets Of Chemical Baths For Protection And Longevity Of The Structure, Interconnected By Mig Welding And Painted Through The Epoxy Powder System, Available Colors Thermoplastic Resin Components: Green Seat, Back And Arm Injected With Manufacturers Logo In High Relief, With Option To Insert The City Hall Logo. The Lower Part Of The Front Arm Must Contain A Structure Injected Into Polypropylene In Black, Which Will Serve As A Base For Adjusting The Arm. Stickers/Plates Or Any Other Type Of Identification That Can Be Removable Will Not Be Accepted. Present Along With The Price Proposal: - Test Report Issued By A Laboratory Accredited By Inmetro For Resistance To Corrosion Due To Exposure To A Saturated Humid Chamber In Accordance With Abnt Nbr 8095:2015 - Metallic Material, With Adjustable Front Plate.. Specification: School Chair, Locking Using Screws. Tube Closing Tips: Produced In Thermoplastic Resin And Fitted To The Structure. Load Capacity: 120 Kg; -Minimum Backrest Width: 40 Cm; -Minimum Backrest Height: 24 Cm; - Minimum Seat Width: 40 Cm; - Minimum Seat Depth: 40 Cm; - Front Arm Size 56X38 Seat To Floor Height: 0, Which Will Serve As A Base For Adjusting The Arm. Stickers/Plates Or Any Other Type Of Identification That Can Be Removable Will Not Be Accepted. Present Along With The Price Proposal: - Test Report Issued By A Laboratory Accredited To Inmetro For Resistance To Corrosion By Exposure To A Saturated Humid Chamber In Accordance With Abnt Standard Nbr 8095:2015 - Coated And Uncoated Metallic Material - Corrosion P, Student Set 04B 1 Table + 1 Chair - Cja-04B (Fnde Standard).. Specification: Student Set 04B 1 Table + 1 Chair - Cja-04B (Fnde Standard) Set For Children With Height Between 1.33 To 1.59M. Individual Student Set Composed Of 1 (One) Table And 1 (One) Chair, Certified By Inmetro, And In Compliance With Standard Abnt Nbr 14006 - School Furniture - Chairs And Tables For Individual Student Set. 1.2 Individual Table With Injected Plastic Top, Equipped With Injected Structural Platter Made Of Technical Plastic, Mounted On A Tubular Steel Structure, Containing Injected Plastic Book Holders. 1.3 Indi Chair