Tenders Are Invited For Loader Excavator For Earthworks

Automatic Soil Sampler + Vehicle. Auto Sampler: 1. Hydraulic System 2. Selection Principle Hydraulic Hammer + Hydraulic Cylinder, Hydraulic Pump At Least 16 L/Min, 120 Bar 3. Electrical Supply - 12 Volts Dc, Battery Capacity - 14 Ah, 250 W, 4. Hydraulic Tank No Less Than 7 Liters, Net Weight No Less Than 91.5 Kg 5. Automation Of Selection, Sample Depths 0-30; 30-60 Cm, Selection Levels - 2 Levels, Probe Diameter Mm - 26, Samples Per Hour - 15, Sampling Speed - 20 Sec, Sample/Hour - 225, Sample Weight, G 75 - 138, Sample Volume, G Per Cm* (Probe, Mm) - 2.3 (26), Car: 6. Pickup Truck, Engine Capacity Of At Least 2.4 Liters (2378 Cc) Petrol With A Turbocharger 7. Drive Type – Full 8. Maximum Power Not Less Than (Hp) 204 9. Maximum Torque 320 Nm At 2000-4000 Rpm. 10. Gearbox – Manual Transmission 6 11. Fuel Tank Capacity Is At Least 74 Liters. 12. Wheelbase, Mm 3090 13. Overall Dimensions(S) Length/Width/Height Not Less Than – 5325_1880_1830 14. Body Dimensions No Less Than – 1520_1520_470 15. Load Capacity (Kg) Not Less Than - 900 16. Curb Weight (Kg) Not Less Than - 1940 17. Ground Clearance When Fully Loaded (Mm) Not Less Than 22, Tractor. 1. 4-Cylinder Diesel Engine. Engine Power Not Less Than 103 Kw/139 Hp. 2. Transmission - Wet Clutch With High/Low Function: 24 Forward Gears/12 Reverse Gears 3. Spacious And Sealed Cabin With A High Level Of Noise Insulation And Air Conditioning. 4. Hydraulics At Least 60 L/Min 5. Pto 540/1000 Rpm. 6. Rear Wheels 420/85R38 7. Front Wheels 380/85R24 8. Fuel Tank Capacity Is At Least 220 Liters. 9. Category Ii Rear Linkage 10. 3 Mechanical Scv Valves 11. Front Weight Holder – 69 Kg 12. At Least 12 Weights With A Quick Fastening System - 600 Kg 13. Weights For Rear Wheels Not Less Than 440 Kg 14. 2 Front Work Lights 15. Fuel/Water Separator. 16. Standards: Tr Ts 031/2012, Stage Iii (Tier 3) 17. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications Of The Potential Supplier., Backhoe Loader. 1. Operating Weight, Not Less Than 9280 Kg 2. Engine Power Of At Least 101 L/S/ 3. Volume Of The Front Bucket, Not Less Than 1.1 M3 4. Excavator Bucket Volume, Not Less Than 0.22 M3 5. Hydraulic Line For Attachments. 6. Telescopic Boom, Digging Depth Of At Least 4390/5540 Mm. 7. Loading Bucket Capacity Of At Least 2000 Kg. 8. Unloading Height, Not Less Than 3730 Mm 9. Reach Of The Bucket Edge, Not Less Than 635 Mm 10. Ground Clearance, Not Less Than 479 Mm 11. Vdo Instrument Panel 12. Rvd Manuli 13. Transmission, Carraro Axles 14. Digging Carriage Shiftable 15. Excavator Bucket Handle 16. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications Of The Potential Supplier.