Paper-Based Sanding Wheels Dewalt Dt3136 (125 Mm, P180, 25 Pcs Per Pack), Paper-Based Sanding Wheels Dewalt Dt3132 (125 Mm, 25 Pcs Per Pack, P60 For Wood/Paint) 5 Packs Of Each Type, Arden 0304 Slotted Cutter (Slotted) V-Shaped 1/2 X 1, Manufacturer Arden, Angle 90°, Working Length 25.4 Mm, Total Length 62 Mm, Shank Diameter 12.7 Mm, Cutting Part Diameter 25.4 To Agree With The Customer, Torsion Bar Bits Industrial, Total 65Mm, (10 Pcs.), Forged 2-Sided Bits Industrial, Ph2 + Ph2 65 Mm, 10 Pcs. Included, Torsion Zone Increases Resistance To Rotational Loads, Industrial Steel S2, To Agree With The Customer, Set Of Keys, 6-22 Mm, Cr-V Steel, Universal Set With Storage Bag, To Agree With The Customer, Nordberg Gun Ti4l Blowing Plastic, 20 Cm Nozzle, Adjustable Air Flow, Extended Control Handle For Comfortable Use, Nozzle With Aerodynamic Effect, Significantly Increasing Air Flow, To Agree With The Customer, Hose For Compressor Shili Tools Rapid 8Mmx10m, Rapid Connection Type, Hose Length 10.0M, Maximum Pressure 10.0Bar, Internal Diameter 6.0Mm, External Diameter 8.0Mm, To Agree With The Customer, M8 Washer, M8 Wing Nut, M8 Mortise Nut (Drive-In With Teeth, Fasteners With Special Spikes For Tighter Contact With The Working Surface And Rigid Fixation At The Fastening Point. Structurally, The Nut Is A Cylinder With A Thread On The Inside. On One Side Of The Cylindrical Body There Is A Cap With A Wide Brim, On Which The Spikes Are Placed), 100 From Each Pieces. To Agree With The Customer, Belt Emery P40, P80, P120, 1 Roll Of Each Size, To Agree With The Customer, Air Quick Release Ytpp-20 5*8Mm, Type: Direct Connection (Insert), Connection Type: Self-Locking (Collet), With Quick Installation/Disassembly, Marking: Ytpp-20 (Often Indicates The Series And Size), Dimensions: Approximately 5*8 Mm (Internal 5 Mm, External 8 Mm), Purpose: Ideal For Pneumatic Systems Where A Reliable But Easily Dismountable Connection Of Hoses, To Agree With The Customer, Spray Gun Zubr 06454-0.8, Tank, Adapter, Plastic Filter, Tool For Servicing The Spray Gun, To Agree With The Customer, Motor Oil Rosneft Magnum Maxtec 10W-40 (Rnpk), 5 L, Type Of Oil Is Semi-Synthetic, Viscosity Grade Sae10w-40, Class Apisl, Cf, Class Aceaa3/B4, Tolerances Sl, Cf, To Agree With The Customer, Plywood 1525X1525x21mm, 1525X1525x18mm, 1525X1525x12mm, 5 Pieces Of Each Size, To Agree With The Customer, Cordless Impact Drill/Driver Milwaukee M18 Cblpd-402C, Manufacturer: Milwaukee, Max. Torque:60 Nm, Battery Type:Li-Ion, Batteries Included:2, Battery Voltage:18 V, Type:Drill/Driver, Battery Capacity (Ah):4 Ah, Max. Speed:1800 Rpm, Impact Presence:Yes, Chuck Diameter:13, Supplied In:Case, Warranty:12 Months, Brand Origin:Usa, Professional Round Router 6.35/12.7 For Woodworking, Routing And Grooving, Professional Round Router 6.35/12.7 For Woodworking, Routing And Grooving, Suitable For Machine Heads And Electromechanical Engraving Applications Size 1/2*5/8, To Be Approved With Customer, Manifold Stud M8 X 38 X 1.25 - 8.8, Black, 100 Pieces Per Pack, To Agree With The Customer, Monolithic Reinforced Slot Cutter X2 Z=3 D=8X28x83 S=12 Arden Mbx2008288 (L1-83 Mm, L2-28 Mm, D1-8 Mm, D2-12 Mm), Shank Diameter, Mm 12, Cutting Part Diameter Mm8, Cutting Part Length, Mm28, Number Of Teeth, Pcs. 3, Accord With By The Customer, Monolithic Reinforced Slot Cutter X2 Z=3 D=6X28x78 S=12 Arden Mbx2006288 (L1-78 Mm, L2-28 Mm, D1-6 Mm, D2-12 Mm), Shank Diameter, Mm 12, Cutting Part Diameter Mm6, Cutting Part Length, Mm28, Number Of Teeth, Pcs. 3, Accord With By The Customer, Confirmed Bit H4x50mm Expert 14723-04-050, Bit Type: Double-Sided, Bit Shank Type: 1/4, Tip Type: Hex, Length: 50 Mm, Number Of Items: 2 Pcs., Magnetic Tip: Yes, Impact (Torsion): No, To Agree With The Customer, Support Plate For Angle Grinder Gepard Gp0830-125 125Mm, To Agree With The Customer, Round Emery P40, P80, P120, Diameter 125Mm, 1 Roll Of Each Size, To Agree With The Customer
