Coniferous Edged Timber Beam (Block). Characteristics: Section – 50×50 Mm; Length - 6000 Mm; Material - Pine, Spruce; Variety - 1St Grade. Processing - Four-Edged Edged, Unpolished (Unplaned). Compliance With Standards: Manufacturing In Accordance With Gost 8486-86 “Softwood Lumber. Technical Conditions; Determination Of Quality And Defects Of Wood According To Gost 2140-81; Determination Of Humidity According To Gost 16588-91; Determination Of Geometric Parameters And Dimensions According To Gost 24454-80. Humidity Is Natural (No More Than 22-25%). Additional Requirements: The Wood Must Be Healthy, Free From Rot, Blue Stains, Wormholes And Fungal Infections. Wane (Presence Of Bark) Is Not Allowed. The Timber Must Be Smooth, Without Significant Curvature Or Signs Of Warping. Deviations In Thickness And Width Are No More Than ±2 Mm. Products Must Be Protected From Moisture And Precipitation During Transportation And Storage. Each Batch Must Be Accompanied By A Quality Document., Coniferous Edged Timber Beam (Block). Characteristics: Section – 70×50 Mm; Length - 6000 Mm; Material - Pine, Spruce; Variety - 1St Grade. Processing - Four-Edged Edged, Unpolished (Unplaned). Compliance With Standards: Manufacturing In Accordance With Gost 8486-86 “Softwood Lumber. Technical Conditions; Determination Of Quality And Defects Of Wood According To Gost 2140-81; Determination Of Humidity According To Gost 16588-91; Determination Of Geometric Parameters And Dimensions According To Gost 24454-80. Humidity Is Natural (No More Than 22-25%). Additional Requirements: The Wood Must Be Healthy, Free From Rot, Blue Stains, Wormholes And Fungal Infections. Wane (Presence Of Bark) Is Not Allowed. The Timber Must Be Smooth, Without Significant Curvature Or Signs Of Warping. Deviations In Thickness And Width Are No More Than ±2 Mm. Products Must Be Protected From Moisture And Precipitation During Transportation And Storage. Each Batch Must Be Accompanied By A Quality Document.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
