Tenders Are Invited For Reconstruction Of The Section Of District Road No. 1240R Wola Zarczycka - Nowa Sarzyna From Km 0+760 To Km 4+070

The Section Of Road No. 1240R Covered By The Order Starts At Km 0+760 At The Intersection With District Road No. 1238R And Ends At Km 4+070 M. Wola Zarczycka (Smycze Hamlet) With A Total Length Of 3310.00 M. Due To Its Function In The Communication System, The Reconstruction Of The Road Includes Raising The Road Parameters To Class Z (Existing Class L) And Traffic Category Kr-3 With A Permissible Load Of A Single Drive Axle Of 11.5 T. The Basic Scope Of Construction Works To Be Performed As Part Of The Reconstruction Is: - Widening The Road To The Required Lane Width Of 3.0 Mx2 = 6.0 M, Construction Of Hardened Bituminous Roadsides With A Width Of 2 X 1.0 M - Strengthening The Road Structure For Kr3, With A Foundation Layer Made Of A Cement-Emulsion Mixture With A Thickness Of 20 Cm With Recycling Of The Existing Surface, On Road Widenings And Under Hardened Roadsides With Layers Of Foundation Made Of A Mixture Of Hydraulically Bound Aggregate With Cement - Stabilization C1.5/2.0 ≤ 4.0 Mpa With A Thickness Of 20 Cm And With Crushed Aggregate 0/31.5 Mm Mechanically Stabilized With A Layer Thickness After Compaction Of 20 Cm. - Construction Of The Surface On The Road And Hardened Shoulder From Mineral And Asphalt Mixtures - Binding And Wearing Layer With A Thickness Of 8 And 4 Cm, Respectively. - Construction Of Roadsides (2 X 0.25 M Strips) Reinforced With Mechanically Stabilized Crushed Aggregate 0/31.5 Mm, 15 Cm Thick - In Order To Improve Safety, Reconstruction Of The Intersection Of The Subject Dp 1240R With Dp 1238R, By Elevating The Intersection Shield With A Surface Of Granite Paving Stones 17 X 19 Cm, With Setting Concrete Curbs 20 X 30 And Rebuilding The Pavement With Paving Stones, - Improving Drainage By Rebuilding Culverts Under The Road And Exits And Renovating Roadside Ditches, - Making Horizontal Markings By Introducing An Axial And Edge Line With Thick-Layer Materials (Chemically Hardened Masses), And Installation Of Vertical Signs And Traffic Safety Devices. A Detailed Description Of The Subject Of The Order Is The Design Documentation - Annex No. 11 Swz, Technical Specification For The Execution And Acceptance Of Construction Works - Annex No. 9 Swz And The Bill Of Quantities (Appendices No. 8 Swz). By Submitting An Offer, The Contractor Undertakes To Perform The Order In Accordance With The Applicable Construction Law, Technical And Construction Standards, Principles Of Technical Knowledge, Design Documentation, Stwiorb And Bill Of Quantities. All Documents Describing The Subject Of The Contract Should Be Treated As Mutually Complementary And Clarifying In The Sense That In The Event Of Any Ambiguity Or Ambiguity, The Contractor May Not Limit Either The Scope Of His Obligation Or The Scope Of Due Diligence In The Performance Of His Obligations Arising From The Public Procurement Contract. - During The Implementation Of The Subject Of The Contract, The Ordering Party Allows For The Need To Perform Replacement Works In Relation To