Quotation Are Invited For Oil Bath Kit

Quotation are invited for Oil Bath Kit. # CONSTANT TEMPERATURE CALIBRATION BATH FOR CALIBRATION OF OTI AND WTIINDICATORS AND FOR GRADIENT SETTING OF WTI IN OIL FILLED POWER TRANSFORMERS.# EQUIPMENT SHALL BE SUPPLIED AS A COMPLETE, READY TO OPERATE SET WITHALL REQUIRED ACCESSORIES, POWER CABLE, AND OPERAT ING MANUAL.# TEMPERATURE RANGE SHALL BE FROM 0°C TO 200°C USING SUITABLE HIGHTEMPERATURE BATH FLUID (E.G., SILICONE OIL).# TEMPERATU RE SELECTION SHALL BE BY DIGITAL TEMPERATURE CONTROLLER WITHCLEAR NUMERICAL DISPLAY.# TEMPERATURE STABILITY SHALL BE BETTER THAN OR EQUAL TO ±0.005% OF THESET VALUE OVER THE WORKING RANGE.# MAXIMUM PERMISSIBLE VARIATION (NON UNIFORMITY) OF TEMPERATURE IN THEOIL BA TH SHALL NOT EXCEED ±0.20°C OVER THE DEFINED WORKING AREA.# OIL BATH VOLUME SHALL BE APPROXIMATELY 12 LITRES NOMINAL TO ALLOWIMMERSI ON OF OTI/WTI BULBS AND REFERENCE PROBES.# BATH OPENING SHALL BE APPROXIMATELY 140 MM BY 140 MM CLEAR TOACCOMMODATE MULTIPLE INSTRUM ENTS SIMULTANEOUSLY.# WORKING DEPTH SHALL BE MINIMUM 250 MM TO ENSURE ADEQUATE IMMERSIONDEPTH FOR BULBS AND PROBES.# EXTERNAL DIMENS IONS OF THE BATH SHALL NOT EXCEED APPROXIMATELY 400 MM(L) BY 300 MM (W) BY 400 MM (H), TO SUIT BENCH TOP INSTALLATION.# MAXIMUM WEIG HT OF THE COMPLETE UNIT SHALL NOT EXCEED 25 KG TOFACILITATE HANDLING AND PLACEMENT.# ADJUSTABLE OVER TEMPERATURE CUT OUT SHALL BE PR OVIDED TO PROTECT THEBATH AND FLUID AGAINST OVERHEATING.# LOW LIQUID LEVEL CUT OUT SHALL BE PROVIDED TO PREVENT OPERATION OF THEHEAT ER WITHOUT SUFFICIENT BATH FLUID.# INTEGRATED COOLING FUNCTION SHALL BE PROVIDED TO COOL THE BATH FROMMAXIMUM OPERATING TEMPERATURE DOWN TO AT LEAST 0°C AND BELOW AMBIENTTEMPERATURE, IN ORDER TO MINIMIZE WAITING TIME FOR NATURAL COOLING.# VENDOR SHALL STATE THE CO OLING METHOD (E.G., COMPRESSOR BASEDREFRIGERATION OR EXTERNAL CHILLER) AND APPROXIMATE COOLING TIMES FROM200°C TO 60°C AND FROM 60°C TO 0°C.# BATH SHALL BE SUITABLE FOR USE WITH APPROPRIATE HIGH TEMPERATURE BATHFLUIDS COMPATIBLE WITH THE SPECIFIED RANGE (E.G., SIL ICONE OIL FOR HIGHTEMPERATURES, ALCOHOL/WATER MIX BELOW 0°C WHERE APPLICABLE).# UNIT SHALL BE FACTORY ASSEMBLED AND TESTED PRIOR TO DISPATCH, AND TESTRESULTS SHALL BE AVAILABLE ON REQUEST.# A VALID CALIBRATION CERTIFICATE FOR THE BATH TEMPERATURE INDICATIONAND CON TROL SYSTEM, TRACEABLE TO NATIONAL OR INTERNATIONAL STANDARDS,SHALL BE SUPPLIED AND VALID FOR AT LEAST 12 MONTHS FROM DATE OFDELIVER Y.WARRANTY: MINIMUM ONE (1) YEAR AGAINST MANUFACTURING DEFECTS, INCLUDINGPARTS , LABOUR AND TRANSPORTATION.# WARRANTY PERIOD FOR THE COMPLETE UNIT SHALL BE MINIMUM ONE YEAR FROMTHE DATE OF ACCEPTANCE AFTER RECEIPT.# THE UNIT SHALL BEAR CLEAR LABELS INDICATING ELEC TRICAL RATING,OPERATING LIMITS, AND NECESSARY SAFETY WARNINGS IN ENGLISH. Qty: 1 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2492600233)/$value

Refer document

FileName	File Description
Global Tender Document	7483cdd0-6e69-49ec-8565-467e3cbef87c.pdf