1 Piece -Manifold With 3 Ports F/Rot.Mll. The Manifold Is Made Of Medical Grade Polycarbonate Material With Three Easily Rotating Taps. The Maximum Operating Pressure Is 750 Psi Or 50 Atm/Bar. 1 Piece - A 12 Ml Disposable Syringe For Administering Contrast. 1 Piece - 150 Cm Extension Line For Safe Transfer Of Liquid. Tube Inner Diameter: 1.5Mm. Tube Outer Diameter: 2.65 Mm. 1 Piece - Infusion System - Ventilated Infusion System. There Is A Valve Against The Reverse Flow Of Solution Or Blood. The Transparent Top Of The Drip Chamber Improves Visualization Of Droplets And Calculation Of Infusion Rates. Line (Tube) With An Internal Diameter Of 3.0 Mm And An External Diameter Of 4.1 Mm. Total Length - 150Cm. A Secure Luer Lock Connection Prevents Accidental Disconnection Of The Infusion Set. The Roller Clamp Is Made Of Polystyrene, White Color. Sterilization Method: Ethylene Oxide, Y-Shaped Connector With Click-Type Hemostatic Valve. The Connector Is Made Of Medical Grade Polycarbonate. Inside The Hemostatic Valve There Is A 9Fr Spiral For Full And Partial Activation And Deactivation. Made From Medical Grade Silicone Med4930. The Overall Width Of The Device Is 1.46(37Mm) And 3.39(86Mm) In Length. The Device Should Have A Secondary Lumen With A Luer Cannula Formed On The Main Lumen In The Distal Part. The Device Is Equipped With A Deactivation Button, Which Closes The Valve In The Main Lumen Completely With One Click. On The Proximal End Of The Cover There Are Clamping Strips Along The Entire Radius Of The Cover To Ensure A Secure Grip. Packaged In A Sealed Bag Made Of Thermoformable Film And Gas-Permeable Paper. The Ethylene Oxide Residue After Sterilization Is No More Than 10Ug/M. Sterilization Method: Ethylene Oxide., Introducer To Provide Access To Vessels And Effective Manipulation Of Instruments During The Procedure. The Introducer Has A Silicone Hemostatic Valve, A Retainer, A Three-Way Stopcock, And A Suture Flange. The Hemostatic Valve Prevents Backflow Of Blood And Aspiration Of Air. A Secure Lock Prevents The Dilator From Moving Back Through The Introducer During Insertion. The Three-Way Stopcock Can Be Used To Immediately Transition From Drip Infusion To Rapid Rescue Drug Administration Or Blood Pressure Monitoring. The Side Branch Is Made Of A Transparent Flexible Tube To Visualize Air Bubbles. The Cone Of The Introducer Cannula Minimizes Trauma At The Puncture Point During Vascular Access, Thereby Reducing Discomfort For The Patient. Introducer 11 Cm Long, Diameter From 5 To 8 F At The Customers Choice. The Dimension (F) Is Clearly Marked On The Vascular Sheath Hub.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
