Investment Material For The Technology Of Rapid Casting Of Clasps (45X 400 G / 1 L. Used For The Manufacture Of Refractory Models And Casting Flasks. The Final Temperature Of Placing The Muffle In The Furnace Is 900 ° C. High Fluidity, Sandblasting Sand Size 240 Quartz Sand Is Formed By Crushing Rock Containing Quartz. The Distribution Of Its Deposits Is Quite Wide. Prevalence Of Quartz Mineral In Natural Deposits. This Makes Its Extraction Accessible, Which Significantly Affects The Cost Of Water Purification Products Using Quartz Compared To Other Used Purification Products. The Porous Structure Of The Material, Consisting Of Grains Of Sand, Gives It Adsorbing Properties, Which Allows It To Retain Heavy Metal Salts, Radionuclides, And Also Disinfect It From Other Harmful Components., Looks Natural, Has No Smell Or Taste, Very Stable And Elastic Material. Area Of Application: Frames Of Conventional Partial Dentures, As Well As Partial Dentures With Fastening With Locks, Frames With Fastening On Telescopes In Combination With Primary Caps. Agree With The Customer, Aluminum Cartridges Ref 540Kl01 8 Aluminum Soft Sleeves For Pressing With Aluminum Covers, Diameter. Crinkle Sleeves Are Mainly Used On Horizontal Heat Presses With A Heating Chamber Diameter Of 22 Mm, Or With Adapter Tubes For The Same Diameter. Sleeve And Cover Material: Aluminum. Diameter: 22 Mm, Height: 125 Mm Quantity Per Package: 60 Pcs., Metal For Casting High Elasticity. Excellent Stability Even In The Longest Structures. Due To Its Low Vickers Hardness Up To 200, It Is Easy To Process. Low Coefficient Of Thermal Expansion 14.0. High Thermal Stability, Resistance To Deformation During Cauterization Or Soldering. Low Thermal Conductivity. Composition: Technical Properties: Tensile Strength. (Rp0.2) 340 - 355 Mpa Tensile Strength 490 - 510 Mpa Ultimate Elongation 5% Modulus Of Elasticity 200 Gpa Vickers Hardness 200 Hv Density 8.2 - 8.3 G/Cm³ Solidus-Liquidus 1300 - 1410 °C Casting Temperature 1510 - 1560 °C Thermal Expansion Coefficient 14 Μm/M °C, 516931.500.0 G The Material Is Suitable For The Manufacture Of Complete And Partial Removable Dentures. It Has Extraordinary Strength; Dentures Made From This Thermoplastic Are Perfectly Processed, Polished And, Very Importantly, If Necessary, They Can Be Repaired Without Incurring Additional Costs! This Material Belongs To The Group Of Polymethylmethacrylates, But Compared To Bre.Crystal, It Is More Durable And Suitable For Use In The Manufacture Of Complete Removable And Partial Dentures. The Material Is Available In Various Shades Of Colors, Including Completely Transparent
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
