Tenders Are Invited For Optical Instruments – B26-01893-Mv - Purchase Of A Scanning Electron Microscope And Its Equipment

Optical Instruments – B26-01893-Mv - Purchase Of A Scanning Electron Microscope And Its Equipment. The Services Correspond To The Purchase Of A Scanning Electron Microscope And Its Equipment, They Are Broken Down As Follows: A Firm Part - Supply Of A Scanning Electron Microscope Including The Following Equipment And Software: O The Electronic Column, O The Ionic Column As Well As The Associated Software Allowing The Adjustment And Parameterization Of The Column, O The Stage And The Sample Holder, O The Detectors For Imaging Namely:  A Secondary Electron Detector Immersed In The Electronic Column  A Detector Retractable Secondary Electron Filter Located At The Top Of The Electronic Column To Capture The Secondary Electrons Coming From The Extreme Surface Of The Sample.  A Backscattered Electron Detector Immersed In The Electronic Column At High Acquisition Speed.  A Detector Which Allows Both The Detection Of Ions (After Conversion Into Electrons) And Secondary Electrons.  A Secondary Electron Detector Dedicated To Low Vacuum Mode  A Retractable Backscattered Electron Detector O An Energy-Selective Device For Sampling Micro Objects Associated With The Ionic Column - Delivery And Installation Of The Equipment On The Cea/Dif Site In Bruyères-Le-Châtel - Training In The Use Of The Device And Software An Optional Part: - Option 1 – In The Event Of Lifting: Spectrometer Combining The Detection Of Backscattered Electrons And X-Rays, - Option 2 – In The Event Of Lifting: Eds Spectrometer Without Window Including Maintenance For A Period Of One Year, - Option 3 – In Case Of Lifting: Retractable Eds Spectrometer At A Short Distance From The Sample Including Maintenance For A Period Of One Year, - Option 4 – In Case Of Lifting: Two Gas Injectors: A Gold Injector And A Carbon Injector Including Maintenance For A Period Of One Year, - Option 5 – In Case Of Lifting: A Stem Detector Including Maintenance For A Period Of One Year, - Option 6 – In Case Of Lifting: A Type Detector Ebsd Including Maintenance For A Period Of One Year, - Option 7 – In The Event Of Lifting: An Improvement Device Equipped With Clamps Including Maintenance For A Period Of One Year, - Option 8 – In The Event Of Lifting: Three-Dimensional Reconstruction Software, - Option 9 – In The Event Of Lifting: Image And Spectra Post-Processing Software, - Option 10 – In The Event Of Lifting: Maintenance For A Period Of One Year At The End Of The Warranty Period For All Equipment Of The Firm Part - Option 11 – In Case Of Lifting: Guarantee For A Period Of Two Years Of Equipment Of The Firm Part - Option 12 – In Case Of Lifting: Guarantee For U