Tenders Are Invited For Firefighting Vehicles – Purchase Of A Medium-Sized Firefighting Vehicle For The Volunteer Fire Department In Bartodzieje

Firefighting Vehicles – Purchase Of A Medium-Sized Firefighting Vehicle For The Volunteer Fire Department In Bartodzieje. Purchase Of A Medium Fire Extinguishing Vehicle For The Volunteer Fire Department In Bartodzieje. General Requirements. Drive System 4X4 Permanent Drive With Locks. Engine - Euro-6 Type - Rated Power Minimum 265 Kw (360 Hp) At 1900 Rpm - Maximum Torque 1700 Nm At 1000 - 1300 Rpm - Fuel Tank Capacity Minimum 200 Liters - Engine Location At The Front, Longitudinally Gearbox (Mechanical Locked To The Engine) The Gearbox Must Be Automatic With The Number Of Forward Gears Not Less Than 12 And At Least 2 Reverse Gears. Single Wheels At The Front, Double Wheels At The Rear Electrical System - Rated Voltage 24 V With Negative Ground - Batteries At Least 2 X 180 Ah - Alternator At Least 100A (2400 W) - 24 V Charging Socket, Integrated With The Air Charging Connector, Located On The Left Side Of The Cabin Between The Doors, With Light And Sound Signals For Connecting An External Power Source. Crew Cabin Steel, Factory Single-Module, Four-Door, 6-Seater In A 1+1+4 Seating Arrangement, Hydraulically Tilted Using A Manually Operated Pump. The Cabin Steps Must Have Lighting That Turns On Automatically When The Door Is Opened, And All Seats Must Be Equipped With Inertia Seat Belts And Headrests. The Cabin Must Be Adapted To Carry Breathing Apparatus In The Back Of The Rear Seats, And The Mountings Must Enable The Breathing Apparatus To Be Put On While Driving. The Following Additional Equipment Must Be Located Inside The Cabin: - Control Panel For The Signaling And Warning Device - Independent Air Heating, - Portable Analog-Digital Radiotelephone - Lighting Lamp For The Commander, Mounted On An Adjustable Boom. Outside The Cabin There Must Be: - A Battery Charging Socket Disconnected Automatically When The Engine Is Started, - Signaling And Warning, Acoustic And Light Devices On The Roof Of The Cabin And Two Additional Blue Lamps On The Dummy At The Front Of The Cabin, - An 8T Electric Winch + A 30M Rope, - A Reversing Camera With A 10 Color Display Mounted In The Cabin In The Drivers Field Of View. Hardware Bodywork Equipment Must Be Made Entirely Of Corrosion-Resistant Materials, The Frame Is Screwed From Aluminum Profiles, The Sheathing Is Made Of Anodized Aluminum, And The Finishing Elements Are Made Of Composite Materials. There Must Be Three Compartments For The Equipment On Each Side. There Must Be An Operating Station For The Pump At The Back Of The Structure Made Of Anodized Aluminum Sheet. The Floor Of The Lockers Must Be Lined With Smooth Acid-Resistant Sheet Metal With No Threshold, Which Allows For Easy Cleaning Of The Lockers. The Roof Of The Structure Must Be Made Of A Working Platform, Covered With An Anti-Slip Surface. Access To The Roof Must Be Provided By A Ladder Located At The Rear Of The Vehicle.