Tenders Are Invited For Delivery Of Protection Measures And Direct Coercive Measures

• Bulletproof Vest (23 Pieces): Fragment Resistance Class At The O3 Level According To The Pn-V-87000:2011 Standard Light Ballistic Protection, Bullet And Fragmentation-Proof Vests. Requirements And Tests, Bulletproof Resistance Class At The K2 Level According To The Pn-V-87000:2011 Standard Light Ballistic Protection, Bulletproof And Fragmentation-Proof Vests. Requirements And Research, Black Color Molle System, Ballistic Plates And Ballistic Panels. The Vest Must Be Fully Adjustable Vertically And Circumferentially In Order To Fit The Users Figure. The Design Of The Vest Must Enable Easy Putting On And Taking Off, And It Must Be Adjustable In Circumference And Length. Each Vest Cover Must Have The Inscription: Prison Service On The Back, Attached With Loop And Hook Self-Adhesive Tape. The Inscriptions Are To Be Made On Material In The Color Of The Main Fabric With A Hooked Self-Adhesive Surface Sewn On The Bottom, With Dimensions: Width (300 ± 10) Mm, Height (100 ± 5) Mm - On The Back The Letters Of The Inscription Prison Service Must Be Made Of Gray Reflective Material. Cleaning And Maintenance Must Be Done Using Generally Available Products. Additional Equipment For The Bulletproof Vest Includes Pockets For Equipment: A Pocket For Communication Means - A Radiotelephone, A Pocket For A Glock 9 Mm Magazine, A Pocket For Handcuffs, A Pocket For A Hand-Held Pepper Sprayer, A Pouch For 12 Mm Cartridges, A Pouch For 5.56 Mm Cartridges, A Black Molle Pouch With Dimensions Of 170 X 50 X 120 Mm. Equipped With An Internal, Elastic Stabilizing Belt That Prevents Uncontrolled Movement Of The Rear Ballistic Insert, E.G. While Running. Materials That Are Resistant To Abrasion And Do Not Stain The Users Clothing, As Well As The Arrangement And Design Of Fasteners Do Not Damage The Users Clothing. Ballistic Inserts For A Bulletproof Vest Consist Of 2 Pieces: 2 Front, Rear And Side Inserts. Warranty: Minimum 10 Years For Ballistic Strength.• Bulletproof Helmet (32 Pieces): Black. Ballistic Resistance Of The Body: - Fragmentation Resistance: Resistance Class O3 According To The Pn-V87001:2011 Standard Light Ballistic Covers. Shrapnel- And Bullet-Proof Protective Helmets. Requirements And Tests. - Bullet Resistance: Resistance Class K2 According To The Pn - V-87001:2011 Standard Light Ballistic Shields. Shrapnel-Proof And Bullet-Proof Protective Helmets. Requirements And Tests. Minimum 10-Year Warranty On The Ballistic Strength Of The Helmet Shell. The Design Of The Helmet Must Be In Accordance With The Ach (F.A.S.T.) Standard, With A High Cut, Made Of Composite Materials, In The Full Version, I.E. Revealing The Ear In Black, And Must Not Have The So-Called Front Part. Visor, The Edge Of The Helmet Must Be Protected Against Moisture With An Edge Band, It Should Not Impede Head Movements And The Performance Of Basic Work Activities, Such As: Running, Driving A Car, Adopting A Shooting Stance, Shooting, It Should Not Limit Visibility And Should Not Impede The Sim