Bids Are Invited For Acquisition Of A Digital Radiographic Image Development System (Dr System) And Dry Printer, In Accordance With Sesa Resolution 1364/2025, In Response To The Needs Of The Municipal Health Department.

Qty= 02 - Dr System – Dr Flat Panel Detector - Direct Capture Plate, Directed For General Radiology Exams; Qty= 02 - Aed Automatic Exposure Detection System, - With Amorphous Silicon Detector And Cesium Iodide Conversion Screen (Csi), - Active Area: 358Mmx430mm - Flat Panel Area: 350Mmx430mm (14”X17”) - Dimensions (H X W X D) Approx.: 384X460x15mm - Digital Image Resolution (A/D): 16 Bits - High Resolution Reading Of 140 Microns - Matrix Of 2560 - Approximate Weight 3.2 Kg. - Coverage In Carbon Fiber And Magnesium Fiber: Greater Durability - Support Of At Least 300 Kg Distributed, - Degree Of Protection At Least Ip56, Against Water Jets, Liquids And Dust; -Internal Memory For 200 Images. -Possibility Of Wired Operation (Optional Cable) Qty= 02 – One Long-Lasting Internal Battery And One Extra, Providing 15 Hours Of Consecutive Work Without Recharging. Qty= 01 - Workstation Hw (Dr): Hp Notebook I5 Processor (Or Better) Windows 10/11 Pro 64 Bits (Or Better); Integrated Video Card/ 8Gb Ram – 1Tb Ssd; Minimum Screen Of 14”. Print (Print), Cd Export (Image Recording On Cd/Dvd With Integrated Viewer); Dicom Modality, Erformed Procedure Step; Automatic Edges; Contains Ruler Licenses, Angle Measurement, Special Notes, Etc. Non-Obligated Emergency Exams, Dry Printer: Dry Film Printer For Use In General Radiology (Cr And Dr), Other Medical Modalities (Computed Tomography, Magnetic Resonance Imaging) And Mammography Printing System Using Thermal Or Higher Technology; Of Daylight Films In Magazine With A Minimum Capacity Of 120 Films; Spot Size For Final Image Of At Least 50 Microns For Mammography; Print Resolution Of At Least 508 Dpi; On-Line Drawers/Tray (Any Film Size In Each Tray/Drawer). Automatic Control Of Film Density. Connection To Dr Equipment Or Other Modalities Through The Native Dicom 3.0 Protocol, That Is, Without The Need For External Accessories (Print Server) To Convert The Signal To The Dicom 3.0 Standard; 110 V/60 Hz Or 220 V/60 Hz. 12 (Twelve) Months Warranty Accessories: Sine Ups Compatible With The Printer, 04/16/2026 - 15:17:20.