Electric Water Heaters Evn-K-R, Evn-K-A Are Designed For Heating Water In Heating Systems Of Buildings At A Coolant Pressure Of Up To 0.15 Mpa. In Heating Systems, Electric Boilers Can Be Used Independently Or In Conjunction With Heaters Operating On Solid, Liquid Or Gaseous Fuels, Subject To The Necessary Safety Requirements For Installation And Operation. On The Front Panel Of The Built-In Evn-K Control Panel There Is A Temperature Regulator Knob, Switches For Control Stages And A Voltage Indication. The Temperature Regulator Allows You To Set And Automatically Maintain The Required Temperature Of The Coolant In The Heating System In The Range From 35°C To 85°C. When The Set Coolant Temperature Is Reached, The Heating Of The Electric Boiler Is Automatically Turned Off. When The Coolant Temperature Drops 2-3°C Below The Set Value, The Heating Of The Electric Boiler Is Automatically Turned On. Step Control Of The Power Of Electric Boilers Allows You To Maintain The Required Temperature In The Room In The Most Economical Mode, Depending On The Outside Air Temperature. Power: No Less Than 9 Kw. Voltage: No Less Than 380V. Room Area: Not Less Than 90M2. Dimensions: No Less Than 294X151x585. Weight: Not Less Than 8.8 Kg. Installation Method: Mounted., Device Type - Surge Filter. Number Of Output Sockets - At Least 6, Cord Length, M - At Least 5, Type Of Sockets. European Standard With Grounding Maximum Load Current – Not Less Than 20 A, Rated Input Voltage - No Less Than 220 - 250 V Ac Frequency - At Least 50 Hz, Indication - Network Connection Indicator Features - Wall Mounting Color Used In Decoration - Black, Additionally - Case - Abs Plastic Dimensions And Weight. Dimensions (W X H X D) No Less Than -32.5 X 4 X 5 Cm, Package Dimensions (W X H X D) No Less Than -9.5 X 41 X 4.6 Cm, Product Weight - No Less Than 0.37 Kg. Weight With Packaging Is No Less Than 0.43 Kg., Cement M450 Is A High-Strength Portland Cement (Class B35), Intended For Critical Structures That Can Withstand High Loads. It Is Characterized By High Moisture And Frost Resistance, Rapid Strength Gain, And Is Often Used In Monolithic Construction, In The Construction Of Bridges And Hydraulic Structures. Usually Supplied In 50 Kg Bags., Hose For Rapid Compressor 8 Mm X 10 M. Maximum Pressure No More Than 12.0. Connection Type - Rapid. External Diameter – No Less Than 8.0 Mm. Inner Diameter – No Less Than 6.0 Mm. Hose Length – At Least 10.0 M. Additional Information - Gel., Set Of Tools For Cutting Pipe Threads. A Set Of Tools For Cutting Pipe Threads, At Least 14 Pcs. / Integrated Internal And External Pipe Threading Tool - 1/2, 3/4, 1+4 Integrated Internal And External Thread Heads, Compatible With Electric Drill, Pvc/Plastic Pipe Threading Tool.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
