Request For Quotation Purchase Of Hv Varnish And Nc-132 Enamel

Nitrocellulose Enamel Nts-132, Color Khaki (Military). Purpose: For Painting Wooden, Concrete And Metal Surfaces Exposed To Atmospheric Conditions With Temperature Changes From -12 To +60 Degrees. Composition: Colloxylin Varnish; Alkyd Resin; Plasticizers; Pigments Of Different Colors; Special Fillers. Characteristics: Intended For Application By Brush And Spray Method; Does Not Fade For A Long Time Under The Influence Of Ultraviolet Radiation; Quick-Drying (Drying Time - 2 Hours At +20 Degrees); Consumption - 30 - 120 G/Sq.M. M Depending On The Type Of Application; The Appearance Of The Coating Is Glossy, Uniform, Without Inclusions, Pits And Bumps, Wrinkles, Drips; Hardness According To The Tml Device - 0.15 Cu. E., According To The U-1 Device - 50 Cm; Viscosity According To Vz-4 - 60 - 100 S; The Proportion Of Dry Residue For Red Enamel Is 29 - 35%, For Other Colors - 32 - 40%; Hardness According To The M-3 Pendulum Type Device - 0.3 Cu. E.; Resistance To Industrial Oil At Room Temperature - 6 Hours, To Water - 1 Hour; Solvent For Enamel - No. 646. Compliance With Gost 6631-74 “Enamels Of Grades Nts-132. Technical Conditions. Requirements For Containers: Euro Bucket/Drum With A Capacity Of 30 Kg., Nitrocellulose Enamel Nts-132, Color Black. Purpose: For Painting Wooden, Concrete And Metal Surfaces Exposed To Atmospheric Conditions With Temperature Changes From -12 To +60 Degrees. Composition: Colloxylin Varnish; Alkyd Resin; Plasticizers; Pigments Of Different Colors; Special Fillers. Characteristics: Intended For Application By Brush And Spray Method; Does Not Fade For A Long Time Under The Influence Of Ultraviolet Radiation; Quick-Drying (Drying Time - 2 Hours At +20 Degrees); Consumption - 30 - 120 G/Sq.M. M Depending On The Type Of Application; The Appearance Of The Coating Is Glossy, Uniform, Without Inclusions, Pits And Bumps, Wrinkles, Drips; Hardness According To The Tml Device - 0.15 Cu. E., According To The U-1 Device - 50 Cm; Viscosity According To Vz-4 - 60 - 100 S; The Proportion Of Dry Residue For Red Enamel Is 29 - 35%, For Other Colors - 32 - 40%; Hardness According To The M-3 Pendulum Type Device - 0.3 Cu. E.; Resistance To Industrial Oil At Room Temperature - 6 Hours, To Water - 1 Hour; Solvent For Enamel - No. 646. Compliance With Gost 6631-74 “Enamels Of Grades Nts-132. Technical Conditions. Requirements For Containers: Euro Bucket/Drum With A Capacity Of 30 Kg., Varnish Xb-784, Color “Mahogany”. Designed For Protective And Decorative Finishing Of Wooden Surfaces, As Well As For Painting Components And Parts Made Of Metal And Concrete Used Indoors And In Atmospheric Conditions. The Varnish Is Characterized As Quick-Drying, Highly Water-Resistant And Resistant To Aggressive Environments (Solutions Of Salts, Alkalis, Acids). The Composition Forms A Durable Glossy Coating That Emphasizes The Natural Texture Of The Wood. The Date Of Manufacture Of The Product Is No Earlier Than 02/01/2025. The Product Must Strictly Comply With Gost 7313-75 “Enamels Xb-785 And Varnish Xb-784. Technical Conditions. Delivery Is Carried Out In Sealed Metal Containers (Euro Buckets Or Drums) In Factory Packaging Of 20 Kg, Which Ensures The Safety Of Volatile Components And Physical And Chemical Properties Of The Composition. The Supplier Is Obliged To Provide A Quality Certificate And A Manufacturers Passport For The Supplied Batch., Nitrocellulose Enamel Nts-132, Color Yellow. Purpose: For Painting Wooden, Concrete And Metal Surfaces Exposed To Atmospheric Conditions With Temperature Changes From -12 To +60 Degrees. Composition: Colloxylin Varnish; Alkyd Resin; Plasticizers; Pigments Of Different Colors; Special Fillers. Characteristics: Intended For Application By Brush And Spray Method; Does Not Fade For A Long Time Under The Influence Of Ultraviolet Radiation; Quick-Drying (Drying Time - 2 Hours At +20 Degrees); Consumption - 30 - 120 G/Sq.M. M Depending On The Type Of Application; The Appearance Of The Coating Is Glossy, Uniform, Without Inclusions, Pits And Bumps, Wrinkles, Drips; Hardness According To The Tml Device - 0.15 Cu. E., According To The U-1 Device - 50 Cm; Viscosity According To Vz-4 - 60 - 100 S; The Proportion Of Dry Residue For Red Enamel Is 29 - 35%, For Other Colors - 32 - 40%; Hardness According To The M-3 Pendulum Type Device - 0.3 Cu. E.; Resistance To Industrial Oil At Room Temperature - 6 Hours, To Water - 1 Hour; Solvent For Enamel - No. 646. Compliance With Gost 6631-74 “Enamels Of Grades Nts-132. Technical Conditions. Requirements For Containers: Euro Bucket/Drum With A Capacity Of 30 Kg.