Bids Are Invited For “Registration Of Prices For Possible Acquisitions Of Submerged, Surface And Submersible Motor Pumps To Serve The Water And Sewage Department Of Jaciara-Mt”.

Submerged Motor Pump Set For Installation In Deep Tubular Wells, Flow 35 M³/H; Manometric Height 146 Mca (With Maximum Tolerance Of Up To +5%), Nominal Motor Power 27.5 Hp, 220/380 V, Three-Phase, Must Cover The Entire Operating Range Of The Pump, Motor Operation Using Service Factor Will Not Be Accepted; Maximum Constructive Diameter Of 147 Mm. Construction Data: Pumper: Stage Body Made From Cast Iron, Impeller Made From Cast Stainless Steel – Cf8. Motor: Housing Made Of Drawn Carbon Steel (Din 2393), Rewindable, Lubricated And Cooled With Its Own Water, Hermetically Sealed With Device For Replacing The Lubricating Liquid (Water), Electrical Power Cable Suitable For Submersion In Water, Flow Rate65m³/H; Gauge Height113mca (With Tolerance Maximum Up To +5%), Nominal Motor Power 37, 220/380V, Must Cover The Pump Operating Range, Motor Operation Using Service Factor Will Not Be Accepted; Submerged For Installation In Deep Tubular Well, Flow 150M³/H; Manometric Height 83 Mca (With Maximum Tolerance Of Up To +5%), Nominal Motor Power 50 Hp, 380 V, Motor Operation Using Service Factor Will Not Be Accepted; Maximum Construction Diameter Of 196 Mm. Construction Data: Pumper: Stage Body Made From Cast Iron, Impeller Made From Cast Stainless Steel Cf8. Motor: Housing Made Of Drawn Carbon Steel (Din2393), Lubricated And Cooled With Its Own Water, Hermetically Sealed With Lubricant Liquid (Water) Replacement Device, Electrical Power Cable Suitable For Submersion In Water, Flow Rate 75 M³/H; Manometric Height 188 Mca (With Maximum Tolerance Of Up To +5%), Nominal Engine Power 70 Hp, Engine Operation Using Service Factor Will Not Be Accepted; Maximum Construction Diameter Of 182 Mm. Construction Data: Pumper: Stage Body Made Of Cast Iron, Impeller Made Of Cast Stainless Steel – Cf8. Motor: Housing Made Of Drawn Carbon Steel (Din 2393), 04/14/2026 - 09:52:17, Flow 75M³/H; Head Height 139Mca (With Maximum Tolerance Up To +5%), Nominal Engine Power 60 Hp, Engine Operation Using Service Factor Will Not Be Accepted; Construction Diameter Maximum 146 Mm. Construction Data: Pumper: Stage Body Made Of Cast Iron, Rotor Made Of Cast Stainless Steel–Cf8. Motor: Housing Made Of Drawn Carbon Steel (Din 2393), Lubricated And Cooled With Water, Hermetically Sealed With Lubricant Replacement Device (Water), Flow Rate65m³/H; As It Must Cover The Entire Pump Operating Range, Engine Operation Using Service Factor Will Not Be Accepted; Maximum Construction Diameter Of 147 Mm. Construction Data: Pumper: Stage Body Made Of Cast Stainless Steel–Cf8. Motor: Housing Made Of Drawn Carbon Steel Din2393), Lubricated And Cooled With Its Own Water, Horizontal Shaft Bearing Multistage Motor Pump Set With 5 Closed Rotors In Stainless Steel, Volutag G20 Flow Rate Of 11,000 Liters Per Hour And Height Of 100 Mca, Maximum Pressure 239 Mca, Maximum Flow Rate 27, 4M Electric Motor, Tire Type Coupling And Metallic Base, Ip55 Motor - 4 Strife Voltage, Maximum Power 10 Hp Mechanical Seal, Stainless Steel Shaft, Horizontal Centrifugal Booster Pump)