Brown Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, Red Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, Green Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces, Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, White Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, Yellow Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, Water-Dispersible Acrylic White Matte Facade Paint For Exterior And Interior Use. Paint For Painting The Surface Of External Walls And Creating A High-Quality Coating Indoors With High Operational Load. It Is Characterized By Increased Resistance To Wet Abrasion, Has High Covering Power, Adhesion (Sticking), And Is Resistant To Environmental Influences. Consumption: 150-250 G/M² Per Layer (Depending On Surface Absorbency). There Are 10 Kilograms In A Bucket. Iso 17895:2005, Blue Enamel Pf 115 Is Made On The Basis Of Alkyd Varnish And Is Used For Painting Metal, Wood, Concrete, Brick And Other Surfaces Indoors And Outdoors. There Are 2.7 Kilograms In A Jar. Gost 926-82, Gost 33083-2014, Rotband Gypsum Plaster, Material Packaging 30 Kg, Gray Color, Type Of Use For Interior Work, Type Of Binder Gypsum, Compressive Strength 1 Mpa, Drying Time 8 Hours, Consumption 13 Kg/Sq. M, Dry Gypsum Plaster Mixture With Universal-Purpose Polymer Additives For High-Quality Plastering Of Ceilings And Walls. The Smooth Coating Created By The Product Does Not Require Additional Puttying, • Resistant To Cracking Even When Applied In Thick Layers, • Increased Adhesive Properties Due To Polymer Additives, • Economical Consumption Compared To Traditional Cement-Sand Mixtures • It Is Possible To Apply A Layer Of Plaster Up To 50 Mm In One Sweep And Without Preliminary Spraying (Thicker Layers In 2 Times), • The Product Is Universal: It Is Both Plaster And Putty; • Has Excellent Ability To Retain Moisture: Does Not Delaminate, Suitable For Porous And Highly Absorbent Substrates, As Well As When The Temperature Rises, • Vapor Permeability: Surfaces Continue To “Breathe”, • The Product Does Not Contain Substances That Cause Harm
