Quotation are invited for 47.6mm Diaphragm/Bellow Mech Seal Delivery Date: 2026/05/29 Delivery To: Electricity - Steenbras P S RED1 Plant / PH: 840 4102 Delivery Address: 1 Off Sir Lowry Road, Gordons Bay Closing Date: 2026/04/24 Closing Time: 04:00 PM Description: 4 each x 47.6mm diaphragm/bellow mech seal 3 each x 50mm cartridge mechanical seal 2 each x 12mm grundfos cartridge mech seal 2 each x 30mm cartridge mechanical seal Specification: * Supply and deliver Mechanical Seals for CW pumps 6- 8 Specs are as follow: 47.6mm/ 1 and 7/8 inch imperial Diaphragm mechnical Seal Diameter :Shaft diameter 47.6mm Outside diameter : 64.4mm Lenght : 71mm Seat Type: Viton Pressure rating ; 28Bar Type : Stationary * 50mm Cartridge Seal Shaft Diameter : 50mm Overall Lenght : 57mm Bolt Hole Diameter : 14.7mm Bolt hole to Bolt hole Lenght : 87mm Type : Stationary * 12mm Grundfos Cartridge Seal Shaft Diameter : 12mm Overall Lenght : 57mm Outside Diameter : 25mm Type : Stationary * 30mm Cartridge Seal Shaft Diameter : 30mm Overall Lenght : 57mm Bolt Hole Diameter : 12.5 Bolt hole to Bolt hole Lenght : 65mm Type : Stationary Please call Trevor Farmer, Liezl Carolus or Yusuf Majiet on 0218141874/5 EXT 238 or email:
[email protected],
[email protected],
[email protected] before delivery takes place Delivery Adress: Steenbras Power station 1 Hydro road Gordonsbay 7140 IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/319574
