Tenders Are Invited For Industrial Machinery – Slow Speed Mill

Industrial Machinery – Slow Speed Mill. The Order Concerns A Slow-Speed Mill. Specification Of The Subject Of The Order: 1. Low-Speed Mill - Basic Data: B) Number Of Rotor Revolutions In The Range From 90 To 300 Rpm. C) Rotor Length Ranging From 1200 To 1300 Mm, D) Minimum Width Of The Mill Inlet Opening 1850 Mm, E) Minimum Length Of The Mill Inlet Opening 1250 Mm, F) Welded Rotor Or An Equivalent Design Enabling The Extension Of Its Service Life. 2. Drive: A) Motor With A Rated Power Of Approx. 75 Kw, I.E. +/- 5%. B) Control Using An Inverter, C) Adjustable Rotor Speed Range, D) Drive Transmission - Belt. 3. Knives: A) The Shape Of The Knife Blade - Octagonal, B) The Number Of Knives On The Rotor Ranges From 57 To 70 Pieces, C) Mounting The Knives On The Rotor In A V Arrangement, D) Mounting The Knives On The Rotor Enabling Its Rotation (Change Of Cutting Planes) By Min. 90 Degrees. 4. Key Functionalities: A) Minimum Efficiency Of 1.3 Mg/H, B) Detection Of Foreign Bodies, C) Openable Service Flap Enabling Removal Of Foreign Bodies (Large Contaminants) And Changing The Cutting Plane Of Knives Or Replacing Knives, D) Openable Sieve Basket Enabling Replacement Of Individual Sieve Segments, E) Possibility Of Setting The Cutting Gap From The Outside To Work, F) Smooth Speed Regulation And Automatic Quick Reverse Ensuring Forward Work Again. 5. Automation Control: A) Plc Control With Material Identification Program And Real-Time Motor Load Monitoring To Automatically Adapt To Different Input Materials; B) Equipped With An Operator Panel With A Touch Screen With A Diagonal Of Min. 10. Basic Requirements Below We Indicate The Basic Requirements Specified In Relation To The Subject Of The Order And The Bidder, The Inability Of Which To Be Met By The Bidder Results In A Negative Assessment And Rejection Of The Offer: 1. The Subject Of The Offer Must Relate To And Be Consistent With The Subject Of The Contract Described In Chapter Ii And Must Take Into Account The Specification Contained In Chapter Iii Of The Inquiry. 2. Achievement Of The Assumed Parameters (Functional And Technological) Of The Grinding Process Indicated In Chapter Iii, In Particular Parameter Relating To The Minimum Mill Efficiency Of 1.3 Mg/H. The Parameter Indicated Above Will Have To Be Confirmed In The Technological Test. Only A Positive Result Of The Technological Test Will Be The Basis For Accepting The Device As Part Of The Final Acceptance. 4. Minimum Warranty Service Requirements And Inspections During The Warranty Period: A) Handling The Notification In Polish; B) Taking Service Actions - Immediately After The Notification; C) The Maximum Deadline For The Services Arrival If It Is Not Possible To Remove The Failure Remotely - D) The Contractor Is Obliged To