Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Administrative Furniture, Permanent Equipment And Partitions (Including The Respective Assembly And Installation Services), Aiming To Meet In A Unified Manner The Operational Needs Of The Municipal Health Department And The Municipal Department Of Administration And Planning Of The Municipality Of Senador Firmino/Mg.
Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Administrative Furniture, Permanent Equipment And Partitions (Including The Respective Assembly And Installation Services), Aiming To Meet In A Unified Manner The Operational Needs Of The Municipal Health Department And The Municipal Department Of Administration And Planning Of The Municipality Of Senador Firmino/Mg.
Cabinet 2 Doors In Steel Sheet 22 Gray – Cabinet Made Of Steel Sheet Sae-1008 To Sae-1012 0.76 Mm (#22) With Dimensions Of 1980X900x450mm, With Textured Finish, Consisting Of 2 Doors With Lateral Pivoting, Each Door With 3 Internal Hinges Providing Greater Safety And Equipped With Omega Type Internal Reinforcement Fixed In The Central Part In A Vertical Direction, Providing Greater Resistance. For Greater Security, The Cabinet Is Equipped With A Locking System Using A Handle And A Cremona System That Locks The Door In The Central, Upper And Lower Regions, And Comes With 2 Keys. It Has 4 Reinforced Shelves With 3 Folds On The Front And Back And With 2 Folds On The Sides, They Are Adjustable Through Racks Fixed To The Sides Of The Cabinet, The Racks Are Printed In High Relief With Protrusions For Fitting The Shelves, After Fitting It Is Possible To Lock The Shelves In The Desired Position Using The Protrusion. Of The Rack Itself, Enabling Stability And Resistance, The Adjustment Step Is 50 Mm. The Door Features A Handle Printed In Folds Forming 90 Degree Angles Throughout Its Vertical Extension. At Each Lower End Of The Base Of The Cabinet, A Triangular Stabilizer Must Be Welded, Measuring Approximately 85 Mm On Each Side, With Internal Folds To Structure The Base, Fixed To The Body Of The Furniture By Welding Points, The Stabilizer Must Contain A Rivet Nut For Threaded Fixing Of Leveling Feet, The Leveling Feet Must Be Hexagonal, Their Base Must Be Made Of Polymeric Material Suitable (Black) And Thread In Zinc Plated Steel With 3/8” Thread Soldering, Configuring Two Structures (Doors And Cabinet). In Compliance With Nr 24, Each Door Must Offer Two Ventilation Systems, A Tall Steel Cabinet With 2 Doors, Made Of Steel Sheet Nº 22, In Gray Or Similar. Approximate Dimensions Of 1980 X 920 X 450 Mm (H X W X D). It Has 2 Doors With Side Opening, With Omega Type Internal Reinforcement, Doorknob/Cremon Locking System With Lock And Key. Contains 4 Adjustable And Reinforced Internal Shelves For Better Organization And Load Support. Structure With Anti-Rust Treatment And Textured Electrostatic Epoxy Powder Painting Or Equivalent Quality Finish. Doors With Ventilation Openings, Meeting The Requirements Of Nr 24. Base With Feet Or Feet Raised From The Floor, With Leveling Shoes, Allowing Better Stability And Facilitating The Cleaning Of The Environment. New Product, With Minimum 12 Month Warranty., Steel Cabinet With Legs – 1.20 M Width – Cabinet Made Of Sae 1008 To 1012 Carbon Steel, With Approximate Dimensions Of 1.20 M Width X 0.40 M Depth X 1.98 M Height, Or Similar Measurements. Structure In Sheet Steel With Minimum Thickness No. 24, Containing 02 Opening Doors, With Reinforced Metal Hinges And Key Lock For Locking. It Has Adjustable Internal Shelves, Made Of Sheet Steel, Suitable For Supporting Distributed Loads. Doors With Internal Structural Reinforcement And Printed Ventilation, When Applicable. Equipped With Elevated Feet Made Of Steel Or Adjustable Plastic Shoes, Allowing Better Stability
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
