Bids Are Invited For Recharge Office, To Meet The Demands Of The Municipal Secretariat Of Education, Culture, Sport And Leisure (S.E.C.E.L) At Escola Municipal Anízio Teixeira Da Silva

Charging And Storage Cabinet For Electronic Devices, Must Accommodate A Minimum Of 36 Devices Of Up To 12 Inches, And Must Be Manufactured In Carbon Steel With A Minimum Thickness Of 0.9 Mm. With Textured Electrostatic Painting, Surface Chemical Treatment. Equipped With 04 Castors Of At Least 4 Inches, At Least 02 Of Which With A Locking System, Metal Structure With 360 Degree Rotation Capacity. It Must Contain 04 Doors, Two Front And Two Rear, With An Internal Hinge System To Prevent Its Removal From The Outside. Each Door Must Have Locks With 02 Keys And Copies. Upper, Lower And Central Locking System For Greater Security. Side Handle To Facilitate Transportation And Handling. Place To Accommodate An External Power Cable In Its Own Door. 01 Tray With Longitudinal Reinforcement, Intended For Storage Of Teachers Notebook And Router, With Non-Slip Surface. 02 Internal Trays Made Of Steel Sheet Of At Least 0.9 Mm With Longitudinal Reinforcement. It Must Contain Individual Compartments With Maximum Dimensions Of 25 Mm (Width) X 300 Mm (Height) X 300 Mm (Depth). Drawn Carbon Steel Partitions. It Must Also Contain A Fan And Exhaust Fan To Maintain The Internal Temperature Of The Cabinet, Ensuring Air Circulation And Heat Dissipation. L/D Switch With Light Indicator For Activating The Electrical System. Independent Central Charge Module For Management And Distribution Of Electrical Current. Total Load Should Not Exceed 10A. -Modular Electronic System With Easy Access For Maintenance. It Must Contain At Least 04 Power Strips, Each With At Least 10 2P + T Sockets (Standard Nbr 14136). Each Ruler Must Have An Individual Switch, Facilitating Replacement In The Event Of Failure. There Must Be Co Protection