Tenders are invited for Provision of Drill Cuttings and Waste Management Services. Date Added: April 10, 2026 Deadline: 24/04/2026 Category: Oil & Gas, Engineering Services INTRODUCTION Seplat West Limited, the operator of the NEPL/Seplat Joint Venture, hereby invites interested and prequalified companies with proven experience in the provision of drill cuttings and waste management services, including the supply of equipment, personnel, and related support services required for drilling, completion and workover operations in the Western Assets on onshore wells for a contract period of three (3) years, with an option of an additional two (2) years at the Companys discretion. 2.0 SCOPE OF WORK The scope of work includes the Supply and Provision of Drill Cuttings & Waste Management Services, equipment, personnel and related services. At a minimum, the contractor is expected to supply and provide the following: Drill Cuttings and Waste Management Services Provision of Empty Skips, Coral Barges (1000MT), Empty Tanker Trucks (33,000 45,000ltrs), Transportation of Drill Cuttings Water Base Mud and/or Pseudo-Oil-Base-Mud Cuttings to Contractors Base (Disposal/Treatment) Carry out sampling and collection of samples following NUPRC guidelines Perform laboratory analysis and reporting to company on solids/liquids from worksite and for disposable materials in accordance with same NUPRC guideline Store the base oil (recovered from waste treatment) prior to being transported (by company) to nominated third party Liquid Mud Plant Clean unit for used oil-cuttings contaminated containers (skips) prior to being sent back to worksite. Provision of Diesel-Powered KAMA pump, Diaphragm Pump, Tyre-Driven Excavator, 10T Forklift, Competent and Trained field Personnel, Base support from vendors operational base, Other related equipment and personnel The contract is expected to run for three (3) years with an option to extend for an additional two (2) years, subject to performance and project requirements. 3.0 MANDATORY REQUIREMENTS To be eligible for this tender exercise, interested Companies are required to be pre-qualified in Drill Cuttings and Waste Management Services (Cutting Injection / Cutting Disposal) Nipex Code 3.04.22 of Nipex Joint Qualification System (NJQS) database. All successfully pre-qualified contractors in this category will receive an invitation to Tender (ITT). To determine if you are pre-qualified and view the product/service category you are listed for: Open https://vms.nipex.org/login and access NJQS with your log in details. Click on the Products/Services Status tab to view your status and product codes. If you are not listed in a Product/Service category and you are registered with NUPRC (Nigerian Upstream Petroleum Regulatory Commission) to do business; contact NipeX office at Post Square Towers, 1, 3 Ologun Agbaje Street, off Adeola Odeku Street, Victoria Island, Lagos, Nigeria, with your NUPRC certificate as evidence for verification and necessary update. To initiate the NJQS pre-qualification process, access www.nipex-ng.com click on Registration tab followed by NipeX SAP Ariba Vendor Registration. Any entity intending to bid as a joint venture/alliance must demonstrate a genuine alliance or joint venture with details on scope and responsibilities of parties for this work, and payment arrangements. Such companies must show evidence of joint venture via a legally binding agreement duly signed by the Chief Executive Officer (CEO) of both companies. In the absence of a binding legal agreement relating directly to this activity, the company submitting the response on behalf of the alliance/joint venture must supply a power of attorney authorizing it to do so. To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system. In the section below: OGTAN shall mean Oil and Gas Trainers Association of Nigeria and Tenderer shall mean bidder. Closing Time: 16:00 hrs NipeX Office Address: Post Square Towers, 1, 3 Ologun Agbaje Street, off Adeola Odeku Street, Victoria Island, Lagos, Nigeria 4.0 NIGERIAN CONTENT REQUIREMENTS Seplat West Limited, as an indigenous Exploration and Production Company in Nigeria, is committed to the development of the capabilities of Nigerian companies in compliance with the provisions of the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010 for Nigerian Content Development. Tenderers are to note that they will be requested in the technical tender to provide details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at http://www.ncdmb.gov.ng/images/GUIDELINES/ NCACT.pdf in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations In light of the above, Tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to: Demonstrate that the entity is a Nigerian registered company with greater than 51% equity shareholding. Also, provide form CO2 and CO7, evidence of registration with NCDMB NOGIC JQS and NUPRC certificate. Demonstrate detailed description of the location of in-country committed facilities & infrastructure (address, layout drawing, lease document of technical & administrative office.) in Nigeria to support this contract. Provide a project-specific organogram showing the Names and Nationalities of all key personnel not limited to (Waste Management Supervisor, Waste Management Engineer, Waste Management Excavator Operator, Waste Management Forklift, Waste Management Support) that will execute the work scope for this service. CVs of all personnel listed in the project organogram should be submitted. For any position to be occupied by Expatriate personnel, tenderer shall commit to obtaining expatriate quota approval from NCDMB before project execution. Comply with the latest approved version of NCDMB HCD guidelines by committing (via a letter of undertaking) to providing Project-Specific. Training, man-hour, budget, skill development, and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution. Provide Valid Category 1,2,3,4 or 5 Non-Movable Assets (DA) group NCEC demonstrating ownership of Drill cuttings and waste management equipment to be utilized in the execution of the work scope. Ensure that all vessels (not limited to Barge, Tugboats) to be engaged in this project or service must be categorized as Nigerian owned in the NCDMB latest Marine vessel categorization or vessel owner must have Category A or B NCDMB Marine Vessel Certificate (NCMVC). Attempt to consider briefcase partners as a bypass means, to fulfil local content requirements will be rejected by the Board. Please note that failure to provide any of the above documentation (or requirements) will be a fatal flaw. 5.0 CLOSING DATE Only tenderers who are registered with NJQS Product/Categories: A.Drill Cuttings and Waste Management Services (Cutting Injection / Cutting Disposal) Nipex Code 3.04.22 With a LIVE subscription status at 16:00hours (West African Time) on 24th April 2026, being the advert close date, shall be invited to submit Technical and commercial Bids. 6.0 ADDITIONAL INFORMATION All costs incurred in preparing and processing NJQS prequalification and responding to this tender opportunity shall be on the tenderers own account. This Advertisement and subsequent ITT shall neither be construed as any form of commitment on the part of Seplat West Limited to award any contract to any tenderer and or associated contractors, sub-contractors or agents, nor shall it entitle pre-qualified tenderers to make any claims whatsoever, and/or seek any indemnity from Seplat West Limited and/or any of its partners by virtue of such tenderers having been pre-qualified in NJQS. The tendering process shall be undertaken in accordance with the NNPC contracting process in compliance with Public Procurement Act 2007. SEPLAT will communicate only with authorized officers of the qualifying companies at each stage of the tender process, as necessary, and will NOT communicate through individuals or appointed agents. This tender and any related process neither creates any commitment by Seplat West Limited nor establish any legal relationship. All information must be provided in English Language. Notwithstanding the pre-qualification in NJQS, Seplat West Limited is neither committed nor obliged to include your company on any bid list or to award any form of contract to any company and/or associated companies, sub-contractors or agents. SEPLAT will not enter any form of communication with interested bidder(s) in respect hereof from the commencement date of this Advertisement. Submission of any fictitious document will lead to suspension from participation in future bids. Only pre-qualified companies in the appropriate registered NipeX Categorization as at the last date of this advertisement will be eligible and shall be invited for tendering. SEPLAT will not enter correspondence with any company or individual on why a company was short-listed or not short-listed. Only tenderers that score the minimum pass mark in the technical evaluation exercise shall progress to the commercial stage of the tender process. Evaluation of tenders and selection of successful bidders will be based on proven capability of a bidder to offer the service and submission of the best commercial responsive tender. Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS. Contractors that are prequalified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone number) of their company and authorized/responsible p Tender Link : https://etenders.com.ng/seplat-west-limited-invitation-to-tender-for-provision-of-drill-cuttings-and-waste-management-services/
